Spirit System https://www.spirit-system.com/phpBB3/ |
|
Lua-Script for OpenTx/EdgeTx diagnosis direction not correct https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5188 |
Page 1 of 1 |
Author: | Mattes61 [ Sat 23. Apr 2022 17:07:10 ] |
Post subject: | Lua-Script for OpenTx/EdgeTx diagnosis direction not correct |
Hello, Following problem, in the Spirit GT the diagnostic tab all channels are working all in the right directions for example elevator down and elevator up, all ok - In the diagnostic.lua all inputs are working fine (direction), however the direction of the elevator channel is wrong ! elevator up is elevator down and elevator down is elevator up - as said in Spirit-Settings all directions are right ! The programming of the script is probably wrong here - For information, that was the only channel which must be inverted in the transmitter - But when I think here is mabe the direction wrong and it must the channel inverted then I have possibly an problem - If only the directions of the inputs of the transmitter are queried here, then that is simply not correct - it would be best to correct the error or simply not make this Lua script available at all, because it's just not right- Regards Mattes61 |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |