Spirit System
https://www.spirit-system.com/phpBB3/

New Geolink Sensor GPS has sometimes lat and lon reversed
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4951
Page 1 of 1

Author:  Storchy [ Thu 28. Oct 2021 15:20:28 ]
Post subject:  New Geolink Sensor GPS has sometimes lat and lon reversed

I wanted to calculate the distance between the pilot and the helicopter and looked at the table of the GPS sensor.
the variables are pilot-lat / pilot-lon and lat / lon for the helicopter

The calculation only works every other time or so.
I researched and found that sometimes lon and lat are swapped and then until the geolink is turned off
Thomas, you can take a look at that
No problem, if I find that now I just turn the two values around in the lua script

Ciao
Jörg

Author:  Storchy [ Thu 28. Oct 2021 15:49:51 ]
Post subject:  Re: New Geolink Sensor GPS has sometimes lat and lon revers

Now i have seen that the pilot coordinate are reversed sometimes
Just have a look, no problem

Ciao
Jörg

Author:  Storchy [ Mon 01. Nov 2021 17:51:58 ]
Post subject:  Re: New Geolink Sensor GPS has sometimes lat and lon revers

Here is a screenshoot, but i live in Germany :D

Attachments:
screen-2021-11-01-183533.png
screen-2021-11-01-183533.png [ 9.25 KiB | Viewed 2715 times ]

Author:  databeer [ Sat 06. Nov 2021 17:06:26 ]
Post subject:  Re: New Geolink Sensor GPS has sometimes lat and lon revers

Do have the same problem. Latitude datas are saved under LON and Longitude datas under LAT on the Jeti Logfile. Thomas, could you correct it? Thanks

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/