It is currently Fri 29. Mar 2024 3:06:22

All times are UTC + 1 hour





Post new topic Reply to topic  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 20. Jul 2021 18:20:46 
Offline

Joined: Fri 16. Jan 2015 10:13:06
Posts: 26
Hi,

I did my maidenflight with my second Glogo today.

Aside from a continuous tail drift all went very well.

The tail servo is a JR nxb89g and I use a spirit pro which got replaced by Tomas - so it never flew before.

The drift starts after take off - I did two - so each time the same behaviour. I did check any trims on my Jeti.
After I land the behaviour is still visible and only stops if I unplug the battery.

Could it be a servo failure or has it something to do with the fbl unit? Anything I can do to provide more debug information?
On my first Glogo with different servos and a spirit pro this behaviour never showed up.

Many thanks! Andreas


Top
 Profile  
 
PostPosted: Tue 20. Jul 2021 18:49:34 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

can you make sure that gyro is in Head Lock mode?
This is visible in the Diagnostic tab.

If it is HL, then please make sure that after disengaging throttle hold there is no trim. The trim could be set just for flight mode while for hold it might be OK.

The issue could be caused by a wrong initialization as well. It is very important that model is completely without any movement during initialization.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 21. Jul 2021 11:26:28 
Offline

Joined: Fri 16. Jan 2015 10:13:06
Posts: 26
ZeXx86 wrote:
Hello,

can you make sure that gyro is in Head Lock mode?
This is visible in the Diagnostic tab.


Yes it is. I compared all settings to my other glogo. Settings are good.

Quote:
If it is HL, then please make sure that after disengaging throttle hold there is no trim. The trim could be set just for flight mode while for hold it might be OK.

The issue could be caused by a wrong initialization as well. It is very important that model is completely without any movement during initialization.


Checked everything there as well.


Behaviour of the Spirit changed while testing - it took sometimes now 30s until the Swash-plate did its "dance" - and yesterday evening it was constantly blinking (slowly).

This morning all unplugged only battery and usb-cable - I was able to connect one time - but not it is blinking again.

Really weird as yesterday morning all was fine.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .