It is currently Thu 28. Mar 2024 18:28:29

All times are UTC + 1 hour





Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
 Post subject: Re: GT initializing
PostPosted: Tue 20. Jul 2021 19:14:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
No, you can find it in the Diagnostic tab - Advanced Flight Logging.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Tue 20. Jul 2021 19:20:12 
Offline

Joined: Wed 04. Jul 2018 18:03:55
Posts: 175
Thanks for quick reply Tomas, so only in the pc set up software? Turned it off will let you know how it goes...


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Tue 20. Jul 2021 21:45:57 
Offline
User avatar

Joined: Mon 06. Aug 2018 2:10:40
Posts: 29
As Tomas suggested
Turned Advanced flight logger off and it seemed to work, tried several times to initialize, at different time intervals (30 sec. - 30 minutes)and all attempts worked as normal.
so yes, could have been the advanced flight logger.
this is just my findings so far but I thought I would share.


Last edited by rotorhead51 on Wed 21. Jul 2021 0:10:25, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Tue 20. Jul 2021 22:47:58 
Offline

Joined: Wed 04. Jul 2018 18:03:55
Posts: 175
Thought it was ok with flight logging turned off, but just needed a double battery to initialize after standing for 1 hour....


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Wed 21. Jul 2021 0:08:52 
Offline
User avatar

Joined: Mon 06. Aug 2018 2:10:40
Posts: 29
Same as 10x
tried initializing again after sitting for a couple of hours and had to do the double battery connection to get it to initialize.


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Wed 21. Jul 2021 7:41:18 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Can you attach settings please?
Unfortunately we can't replicate it in any way - tested with around hundred of GT units now - even that all units were without a power for over day.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Thu 22. Jul 2021 0:10:05 
Offline
User avatar

Joined: Mon 06. Aug 2018 2:10:40
Posts: 29
here are the settings from my GT unit on my Synergy N5C nitro machine.
thanks


Attachments:
N5C settings.4ds [255 Bytes]
Downloaded 11 times
Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Thu 22. Jul 2021 21:16:43 
Offline

Joined: Wed 04. Jul 2018 18:03:55
Posts: 175
Flew tonight, still had to double connect the rx power plug from life battery. Produced another log....
The log keeps coming up with " Main Loop Hang Occured" and "Backup Oscillator is Used"
Can you tell me what do these entries mean Tomas?......
Also to add that i can not see these problem logs on the jeti DS12, I can only see them
with the pc Spirit settings software...
Regards Adrian


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Mon 26. Jul 2021 10:36:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
10x wrote:
Flew tonight, still had to double connect the rx power plug from life battery. Produced another log....
The log keeps coming up with " Main Loop Hang Occured" and "Backup Oscillator is Used"
Can you tell me what do these entries mean Tomas?......
Also to add that i can not see these problem logs on the jeti DS12, I can only see them
with the pc Spirit settings software...
Regards Adrian

Hello,

both of the errors are sign that something was not good at all. The first one is quite important and I recommend to verify wiring.
The second one mean that the unit was partially damaged sadly (the most common is electrostatic hit from a finger). But it can be still used normally, because it has backup part. Anyway this is not related to the issue discussed in this thread.

Can all affected pilots can let me know what receiver are you using please?

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: GT initializing
PostPosted: Mon 26. Jul 2021 11:34:00 
Offline

Joined: Wed 04. Jul 2018 18:03:55
Posts: 175
Can all affected pilots can let me know what receiver are you using please?[/quote]

Hello Tomas, Jeti REX3 receiver for me...
Regards Adrian


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .