It is currently Thu 28. Mar 2024 23:15:29

All times are UTC + 1 hour





Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 07. Jul 2021 10:28:28 
Offline

Joined: Mon 03. Sep 2018 11:43:07
Posts: 26
Hello,

unfortunately no change in altitude is displayed for me, it just stays at 0.
The speed is displayed as expected.
Can anyone confirm this?

I use the Spirit Pro (3.3.1) and Geolink (1.2.1) and DC 16II.

cheers
Gerald


Top
 Profile  
 
PostPosted: Wed 07. Jul 2021 15:09:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Please note, you have to fly. Altitude measurement is relative from the ground. When model is not flying, it is taking as zero altitude.
So it is starting to measure from the point your model will lift off.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 13. Jul 2021 7:25:33 
Offline

Joined: Mon 03. Sep 2018 11:43:07
Posts: 26
Sorry for the somewhat late reply, unfortunately could not earlier.
I have tested it in the meantime in the flying helicopter.

Speed is displayed with km/h whereby this seems much too low to me.
I suspect here rather that it is m/s. That would fit about.
At Altitude has unfortunately changed nothing, it remained at 0.

Can this please be checked and corrected.

Thank you very much.
Gerald


Top
 Profile  
 
PostPosted: Tue 13. Jul 2021 9:11:32 
Offline

Joined: Thu 01. Jul 2021 11:48:21
Posts: 11
Hi ZeXx86 and Gerrybru

I can confirm a similar behaviour about the altitude telemtry sensor.
The value shows 0 m height and it doesn't change ...
As it was to late to drive to the flying area yesterday I tested in the backyard
and had very limited space ; the helicopter was in hover at about 10m height.

The speed sensor showed changes during this short hover and seemed to work.
( I can't judge about the true speed ... )

Spirit RS (3.3.1) / Geolink (1.2.1) and DC 24

Kind Regards
Roland


Attachments:
sensor_01.jpg
sensor_01.jpg [ 4.06 MiB | Viewed 303 times ]
sensor_02.jpg
sensor_02.jpg [ 5.65 MiB | Viewed 303 times ]
Top
 Profile  
 
PostPosted: Tue 13. Jul 2021 9:31:49 
Offline

Joined: Thu 01. Jul 2021 11:48:21
Posts: 11
to my last post

Checking the log on the spirit rs the sensor for altitude seems to work but doesn't
display the value on the transmitter. In the attachment the 4dl file...

cheers
Roland


Attachments:
flight_12-July-2021_10-59.4dl [14.82 KiB]
Downloaded 14 times
Top
 Profile  
 
PostPosted: Wed 14. Jul 2021 22:19:09 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
I can see the telemetry in sensors S Altitude, however it displays only "-" in my radio.
I have latest Jeti FW, latest 3.3.1 driver in my radio and using Spirit GT

any comments?


Top
 Profile  
 
PostPosted: Thu 15. Jul 2021 6:24:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
It is enough to enable GeoLink feature. Then value will be updated.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 21. Jul 2021 12:17:11 
Offline

Joined: Mon 03. Sep 2018 11:43:07
Posts: 26
Oh, did I miss something?
Does this need to be turned on by flag?
I don't always use the height limit.

As already written, also the speed seems to me clearly too low.
I will test this in the near future.

-Gerald


Top
 Profile  
 
PostPosted: Fri 23. Jul 2021 21:10:05 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 151
Hi Tomas, first off, just confirm if this should work with a Spirit Pro, Geolink, REX 10 and DS24?? All on latest firmware.

The speed does show movement but no idea if accurate.
The Altitude shows on the screen as 0' but doesn't move during flight, nor show any change in the Log in Jeti.
Very odd that the options for Altitude includes Km!! Branson or Bezos a customer??!!
Can the Speed display have an option for MPH as well??
Thanks


Top
 Profile  
 
PostPosted: Fri 23. Jul 2021 21:28:43 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi, with the current firmware Altitude is not shown for Spirit Pro. But upcoming firmware will change it. During next week I guess.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .