Hi,
Im little confused by function autorotation bailout.
According to manual its triggered by activating goverornor when throttle value is 12-50%. If the value is 0-11% smooth spoolup will be triggered.
However with the use of governor throttle value 0-50% controls the motor directly.
So that means that during autorotation the motor isnt completely off?
Actualy my properly calibrated ESC starts with throttle around 13/14% but goes totaly off around 11%...so I would just move the throttle min range a little so I can have motor turned off at 12%...but Im not sure that I just havent missed something...I have never done autos before.
(If that is properly calibrated...but I think Ive done it correctly.)
Thanks if someone can help.
