Spirit System https://www.spirit-system.com/phpBB3/ |
|
Geolink Return to Home (On 4) and Altitude Hold on same CH https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4673 |
Page 1 of 1 |
Author: | haise [ Sat 15. May 2021 19:53:32 ] |
Post subject: | Geolink Return to Home (On 4) and Altitude Hold on same CH |
Hi I `d like to use the RTH (Option: On 4, automatically programmed home position) together with Altitude hold on one Channel. I set -50% on my DX7 to choose "On 4", and the RTH to Lift-Off position works fine then, but not the Altitude hold (its still off). ATH is activated from -56% and lower, but then the "On 4" is not active any more, but "On 1" instead. Where is my mistake? |
Author: | ZeXx86 [ Thu 20. May 2021 11:44:20 ] |
Post subject: | Re: Geolink Return to Home (On 4) and Altitude Hold on same |
Hello, it is required to use other channel in this case. We will add support for RTH and holding altitude at specified height very soon. |
Author: | Pking [ Thu 20. May 2021 15:04:52 ] |
Post subject: | Re: Geolink Return to Home (On 4) and Altitude Hold on same |
ZeXx86 wrote: Hello, Oh yeah, thanks Thomas, it will be useful..it is required to use other channel in this case. We will add support for RTH and holding altitude at specified height very soon. Envoyé de mon iPad en utilisant Tapatalk |
Author: | haise [ Thu 20. May 2021 20:25:42 ] |
Post subject: | Re: Geolink Return to Home (On 4) and Altitude Hold on same |
Great. I am looking forward an Update. Thanks for reply |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |