It is currently Thu 28. Mar 2024 22:29:52

All times are UTC + 1 hour





Post new topic Reply to topic  [ 47 posts ]  Go to page 1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 11. May 2021 7:57:35 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
I posted on FB already, but it went down quickly.

I'm having a weird telemetry issue. Setting up new Spirit 2, latest opentx on Horus x10s with ISRM update, Archer GR8 receiver, Scorpion Tribunus II 14-200 ESC.

Telemetry and integration works, but every few seconds it becomes interrupted for few seconds. See video, where RX telemetry counters (first half) have no issue with update. But counters coming from FBL get frozen sometimes for some seconds. And it's quite regular.

Same problem is if I run Spirit scripts. It loads some data to the page, then hangs for few seconds, and then gets the rest.

What could it be?

[youtube]https://youtu.be/bYEsthtFpI0[/youtube]
https://youtu.be/bYEsthtFpI0


Last edited by azaz44 on Sat 29. Apr 2023 14:48:12, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed 12. May 2021 21:20:10 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

your receiver firmware must be updated, otherwise crash can occur.
FrSky released new firmware to fix the issue.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 14. May 2021 18:18:57 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
I updated. I had firmware 2.1.0, and updated to recent 2.1.7.

And now it's even worse :( Please see videos.

Any idea? And most important, is it safe to fly?

https://youtu.be/5g5to5DQLsc

https://youtu.be/US0OnL_Bdss


Top
 Profile  
 
PostPosted: Sat 15. May 2021 8:33:42 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
Ok, I found in the other thread, that this is resolved for Archer RS in firmware 2.1.8. But not for other receivers yet. Damn... gotta wait then.


Top
 Profile  
 
PostPosted: Thu 20. May 2021 11:48:03 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

we recommend to not fly because apparently signal is lost randomly. New firmware resolved the issue it seems.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 20. May 2021 17:18:21 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
But there isn't any newer firmware for Archer GR8, same with R4, R6, R8... This problem was only resolved in Archer RS which is using a different firmware. Nor sure what to do now...


Top
 Profile  
 
PostPosted: Fri 21. May 2021 6:55:39 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
ZeXx86 wrote:
Hello,

we recommend to not fly because apparently signal is lost randomly. New firmware resolved the issue it seems.


Thomas, could you maybe point me to some source information about this problem? I'm completely confused now and need to figure out what to do, as there isn't any newer firmware for this receiver than the one I use.


Top
 Profile  
 
PostPosted: Fri 28. May 2021 7:17:25 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
There's an issue for that on gitbub:

https://github.com/FrSkyRC/Firmware-Test/issues/121

There's also a beta firmware there which does improve telemetry, but I'm not sure if it's safe to fly with this yet.


Top
 Profile  
 
PostPosted: Fri 28. May 2021 7:24:01 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Unfortunately I dont know which version is safe, but with ACCTS 1 and 2 it was working always perfectly for us.
There are too many changes in their development that we are unable to track. But from reports of other pilots the latest version should work.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 31. May 2021 8:35:51 
Offline

Joined: Thu 12. Jul 2018 17:51:47
Posts: 275
ZeXx86 wrote:
Unfortunately I dont know which version is safe, but with ACCTS 1 and 2 it was working always perfectly for us.
There are too many changes in their development that we are unable to track. But from reports of other pilots the latest version should work.


Thomas, please check the reply from FrSky: https://github.com/FrSkyRC/Firmware-Tes ... -851137312
Basically they are saying, that sth needs to be modified in Spirit or firmware for things to work.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 47 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .