| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Tail sensitivity https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4658 |
Page 1 of 1 |
| Author: | Bill-kraken-700 [ Sun 02. May 2021 17:20:47 ] |
| Post subject: | Tail sensitivity |
Hi after making a few adjustments to my spirit pro and getting heli flying good. I now have the problem that the rudder is to sensitive. What setting do I reduce to slow it down |
|
| Author: | FrankFuss [ Sun 02. May 2021 18:02:46 ] |
| Post subject: | Re: Tail sensitivity |
You reduce the sensitivity of the Rudder stick at center by adding rudder expo on your transmiter. Also, you want to adjust the maximum Rudder Rotation Speed to your liking on the Sensor tab. |
|
| Author: | Bill-kraken-700 [ Sun 02. May 2021 21:44:42 ] |
| Post subject: | Re: Tail sensitivity |
FrankFuss wrote: You reduce the sensitivity of the Rudder stick at center by adding rudder expo on your transmiter. Also, you want to adjust the maximum Rudder Rotation Speed to your liking on the Sensor tab. I was lead to believe not to use the expo on flybarless systems? |
|
| Author: | aziz76 [ Tue 04. May 2021 4:42:33 ] |
| Post subject: | Re: Tail sensitivity |
Trim is what you shouldn’t use. Expo is fine. I run 20% on cyclic and 50% on rudder. Makes things softer/more precise around center. But you should also look at you rudder or yaw rate and be happy with your maximum rotation rate. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|