Spirit System
https://www.spirit-system.com/phpBB3/

Delay setting for xlpower rudder servo
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4642
Page 1 of 1

Author:  Jay23 [ Sat 17. Apr 2021 9:14:49 ]
Post subject:  Delay setting for xlpower rudder servo

As above what delay setting should the xlpower DS747RS 760μs Rudder Servo be set too as it's not listed in the servo list on the spirit website.

Thanks

Author:  Gtamas [ Mon 19. Apr 2021 15:19:13 ]
Post subject:  Re: Delay setting for xlpower rudder servo

Hi!

I'm using the same servo in XL520, with 0 delay. It is working very well.

Author:  Kluftinger [ Sat 24. Apr 2021 16:32:30 ]
Post subject:  Re: Delay setting for xlpower rudder servo

So far I have for all high quality tail servos the "rudder delay" at 0 - 2.

Only for Align tail servos I had to use higher values: Align DS455HV = 8, Align DS 535 HV = 4

Author:  gjhernandez [ Wed 05. May 2021 13:41:01 ]
Post subject:  Re: Delay setting for xlpower rudder servo

I use 4 and works perfect. But according to the manual it seems it should be 0

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/