It is currently Thu 28. Mar 2024 11:17:13

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 05. Apr 2021 17:03:47 
Offline

Joined: Mon 29. Jan 2018 10:52:34
Posts: 89
Hi everybody,

I was looking through the logs collected by the Jeti DS24 from the Spirit Pro, which in turn collects the data from a Jive Pro and saw that the BEC Voltage measured by the Jeti receiver is different from the BEC Voltage measured by the Jive. The one from the Jeti is correct.

Heli on the bench.

Attachment:
File comment: Voltage graph
Screenshot 2021-04-05 184507.png
Screenshot 2021-04-05 184507.png [ 35.58 KiB | Viewed 256 times ]


My config is as follows:
Jive Pro 80+
Spirit Pro collectic telemetry from the ESC throught the Spirit Kontronik 4 pin servo cable (not the new SAT one)
REX6 Jeti receiver on EXbus
Jeti DS24 logging the telemetry from the Spirit

This is another log capture with RPM visibile, heli on the ground with blades installed.

Attachment:
Screenshot 2021-04-05 184944.png
Screenshot 2021-04-05 184944.png [ 56.42 KiB | Viewed 256 times ]


So both logs show the same behaviour.

I have installed the latest version for all the electronics:

Spirit Pro 3.2.2
Jive Pro 1.14
REX6 1.14
DS24 5.05

Any insight will be appreciated.

Thanks


Top
 Profile  
 
PostPosted: Mon 05. Apr 2021 21:34:49 
Offline

Joined: Mon 29. Jan 2018 10:52:34
Posts: 89
After looking at the graphs, it seems that the S Bec Volt chart, is in fact a wrongly mapped temperature reading. I've looked through several logs and the SBec Volt line is behaving like a temperature increase chart (of course, the value is incorrect).

Another example:
Attachment:
Screenshot 2021-04-05 233216.png
Screenshot 2021-04-05 233216.png [ 40.59 KiB | Viewed 202 times ]


Top
 Profile  
 
PostPosted: Tue 06. Apr 2021 7:28:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

we highly recommend using Telem Kontronik V2 cable, since the old protocol is rather unsupported by Kontronik as they added new open TelMe protocol.
There were more shortcomings of the old protocol, for this reason Kontronik released this new one. It is supported for few years now and has many benefits.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 06. Apr 2021 8:30:11 
Offline

Joined: Mon 29. Jan 2018 10:52:34
Posts: 89
Hi Tomas,

I already ordered the new cable. After I install it, I will come back with my findings.

Thanks,
Vlad


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .