Spirit System
https://www.spirit-system.com/phpBB3/

Spirit RS no telemetry at E1 with YGE
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4584
Page 1 of 1

Author:  Dan0111 [ Fri 05. Mar 2021 9:09:56 ]
Post subject:  Spirit RS no telemetry at E1 with YGE

Hi,

i want to use the YGE telemetry with my Spirit RS at E1 but it doesn´t work.

My wiring an programming:

- YGE ESC (tried 65LVT and 95LVT) is set to Jeti protocol
- Master plug to THR (black wire to the ground)
- blue telemetry plug to E1 (black wire to the ground)
- Spirit E1 port is set to Exbus

With a R5L receiver all works fine with the YGE ESC´s, but with the Spirit RS i got no data.

It would be really great if someone else had an idea.

With kindest regards
Daniel

Author:  ZeXx86 [ Fri 05. Mar 2021 9:45:05 ]
Post subject:  Re: Spirit RS no telemetry at E1 with YGE

Hi,

can you share your settings file from Spirit?

Maybe there is some channel assignment for this port in the Spirit unit.

Author:  Dan0111 [ Fri 05. Mar 2021 16:04:07 ]
Post subject:  Re: Spirit RS no telemetry at E1 with YGE

Hi,

for sure.

regards
Daniel

Attachments:
Spirit Tron.4ds [255 Bytes]
Downloaded 16 times

Author:  ZeXx86 [ Mon 08. Mar 2021 8:35:26 ]
Post subject:  Re: Spirit RS no telemetry at E1 with YGE

Thank you. I have examined settings and I can't find anything wrong there.

For this reason I want to ask you, if you can make sure there is correct settings in the REX-RS for E1 port.
Also that ESC settings is really JETI telemetry, not YGE telemetry.

If you will set YGE telemetry in the ESC then there is different wiring with Spirit unit (through SAT port).

These are the only things that could be wrong. Possibly updating ESC to the latest version could help too.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/