| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| S.Port Integration with R161 Receiver https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4528 |
Page 1 of 1 |
| Author: | BenLeo [ Fri 05. Feb 2021 6:31:54 ] |
| Post subject: | S.Port Integration with R161 Receiver |
Hi guys, Looking for some help on wiring a Radiomaster R161 S.port wire from the molex to an Frsky integration cable. Can this be done and if so what's the best way to wire the s.port wire to the integration cable? On my larger frsky receivers with a dedicated S.port this is not an issue. Flybarless unit is S2 Thanks for your help. |
|
| Author: | stefaanbolle [ Fri 05. Feb 2021 8:38:14 ] |
| Post subject: | Re: S.Port Integration with R161 Receiver |
You have to solder a custom cable from which you take the S.Port and the + and GND to a female JR connector to put it on the integration cable. + => + to FBL and + to Integration cable GND => GND to FBL and GND to Integration cable S.BUS => S.BUS to FBL S.PORT => S.PORT to Integration cable RSSI => not used |
|
| Author: | BenLeo [ Fri 12. Feb 2021 1:16:32 ] |
| Post subject: | Re: S.Port Integration with R161 Receiver |
Thank you! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|