It is currently Thu 28. Mar 2024 12:25:55

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 04. Feb 2021 16:32:52 
Offline

Joined: Thu 21. Jan 2021 16:15:59
Posts: 19
Hello,

today i tried to setup my Vario H145 with 4 Swashplate Servos.

Equipment:

Jeti Rex 12 with Jeti Ex bus at E2 connected to Spirit pro wit split wire as manual describe
Jeti DS 24, Helitype "Spirit", CCPM 90° selected

All channels work fine in Diagnostic Tab

But...

-if i move Pitch up and down only the servo at channel 3 moves a little bit, even when System initialized it does.
The other 3 servos dont move.

- if i move roll left and right only servo at channel 1 moves up and down

- if i move nick, servos at 0 and 2 moves fine.

Whatever i do that´s always the same result.
It didn´t work.

What does it mean ?
Anybody an idea ?

THX Martin


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 16:55:23 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

please set Swashplate type to CCPM 90 Velos in the Spirit Settings.
I guess this is what you need for this helicopter.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 16:59:57 
Offline

Joined: Thu 21. Jan 2021 16:15:59
Posts: 19
I´ve done that before in order to test...it doesn´t work, no difference.


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 17:02:59 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
If only one servo is moving while moving pitch, then your setting was CCPM 90. This is unfortunately not correct for this model.
Please retry with CCPM 90 Velos. Then it should be only matter of connecting servos properly and reversing them.
So that when moving with pitch up and down all servos will move in the right direction.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 17:13:33 
Offline

Joined: Thu 21. Jan 2021 16:15:59
Posts: 19
Hello again,

i tried this Option CCPM 90 velos, witch results in an equal situation.

However there should all 4 servos move when moving pitch.

The same when movin roll or nick, ther should alwas move two servos.

Direction at this step is not so important....but they dont move !

So what do you mean should i triy ? Ti doesnt work, CCPM doesnt and CCPM 90 velo doesnt´.

I setup a lot of systems before (Beast, Demon, Helicommand...) so that i think i should know a little bit what i´m doing but it doesnt wotrk ! :(


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 17:25:59 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
I understand, but please retry what I wrote.
It will work certainly, there is no other possibility why it would not work. Please dont forget to save the settings.

Yes, it should work exactly as you described.
With Collective Pitch movement all servos should move.
With Aileron two side servos will move. With Elevator front and rear servo will move.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 04. Feb 2021 17:43:10 
Offline

Joined: Thu 21. Jan 2021 16:15:59
Posts: 19
I dont know why...i really dont know why...but all servos move now ;)

Now i continue.

Sorry and thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .