|
It is currently Sat 21. Sep 2024 2:24:43
|
View unanswered posts | View active topics
Author |
Message |
Klaus
|
Posted: Sun 07. Feb 2021 10:01:22 |
|
Joined: Sat 06. Feb 2021 14:59:11 Posts: 7
|
Tested following: New firmware 3.2.2 and old bin file -> same problems. Then I again installed new Jeti integration files -> same problems.
At last I assigned a bank switch in my Radio and everything in Jeti Integration works well now. I think new firmware 3.2.2 needs to assign a bank switch, otherwise Jeti Integration works strange.
Regards, Klaus
|
|
Top |
|
|
ZeXx86
|
Posted: Sun 07. Feb 2021 20:03:59 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12385
|
We have tested with DS16 and latest firmware, Banks assigned and Banks unassigned. Result is, it is working just perfectly in our case with all latest files. Firmware 5.05 is working also well with DS12.
For this reason we would like to get your Spirit Settings file and we will load it to our units and retry.
_________________ Spirit System developer
|
|
Top |
|
|
ZeXx86
|
Posted: Mon 08. Feb 2021 13:05:56 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12385
|
We have tested also with Manfred's settings file and again, everything is OK.
Do you think it would be possible to disconnect everything from the unit, except BEC and retry?
_________________ Spirit System developer
|
|
Top |
|
|
Klaus
|
Posted: Mon 08. Feb 2021 16:45:36 |
|
Joined: Sat 06. Feb 2021 14:59:11 Posts: 7
|
I also tried to disconnect the telemetry sensor (Kontronik Kolibri) but that makes no difference.
Attached the old 4ds file. In this setting also no channel is assigned for bank in the RS-unit. Also I could not see the headline like Bank 0, Bank 1, Bank 2 in the Jeti Integration menue.
In my new configuration with assigned bank switch and bank channel mapping everything works perfect. So no problem for me anymore.
Regards Klaus
|
|
Top |
|
|
ZeXx86
|
Posted: Fri 12. Feb 2021 9:27:20 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12385
|
Could you please try to update to 3.2.2-r2 firmware version? It is available in the Spirit Settings from now. I hope this can help you.
_________________ Spirit System developer
|
|
Top |
|
|
Klaus
|
Posted: Fri 12. Feb 2021 18:00:05 |
|
Joined: Sat 06. Feb 2021 14:59:11 Posts: 7
|
Tested the r2 version of Firmware.
Now it also works fine with no bank channel mapping in the Spirit-RS unit.
Thanks and best regards Klaus
|
|
Top |
|
|
ZeXx86
|
Posted: Fri 12. Feb 2021 18:01:59 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12385
|
Oh, perfect. So now everything is resolved?
_________________ Spirit System developer
|
|
Top |
|
|
Klaus
|
Posted: Fri 12. Feb 2021 18:18:34 |
|
Joined: Sat 06. Feb 2021 14:59:11 Posts: 7
|
Yes, everything resolved now. Thanks for your quick update.
Klaus
|
|
Top |
|
|
Werni
|
Posted: Tue 23. Feb 2021 9:15:23 |
|
Joined: Fri 03. Aug 2018 20:32:07 Posts: 9 Location: Germany
|
Hi everybody, is it recommended to update from 3.2.2 to 3.2.2-r2 firmware version for everybody? What are the improvements / changes? Best regards Werni
|
|
Top |
|
|
|
Who is online |
|
Users browsing this forum: Bing [Bot] and 143 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|