It is currently Thu 28. Mar 2024 13:20:35

All times are UTC + 1 hour





Post new topic Reply to topic  [ 49 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
 Post subject: Re: Update 3.2.2
PostPosted: Fri 05. Feb 2021 18:07:41 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
Hi,

sure, same radio without changing anything, but other Spirit RS unit.
Updated the RS unit to 3.2.2 and it`s fine.

Checked it more than one time, it is still working.

Best
Manfred

Updated my 3rd RS unit, still working fine also


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Fri 05. Feb 2021 19:51:04 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
Wait please.

Replaced the RS unit by another one on the Helicopter.
Did the Setup......(new programming)

Same problem at hand again.

So, now 2 units are effected,...... it`s not a Hardware mailfunction.

Best
Manfred


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 13:46:06 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
So,
worst case now.

All my Spirit RS units have now this picture of failure.

I flashed back to 3.2.1 and 3.2.0 but it seems that my bin files are the wrong ones.

Can you please send me this file, that a can bring my systems back to the pre-version, please

#
Thats really frustrating

Best
Manfred


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 13:59:19 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 962
Location: Plzeň
Hello, please send a photo of the helicopter as you try on the table.
Don't you have too close to the radio? ... at least 50cm from the receiver antenna.

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 14:15:49 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
It's unclear why you asking for, however.
Attached all 3 units, before update all
3 units works fine, same distance....

I'm really not a newbie.

2 units on 2 different Helicopter
1 unit dismantled of the 3rd Helicopter.
All 3 units seeable on the picture.

Distance around 1 meter to radio.

Manfred


Attachments:
IMG_20210206_140710.jpg
IMG_20210206_140710.jpg [ 2.59 MiB | Viewed 235 times ]
Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 14:24:28 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 151
Have you tried powering up the Spirits with a battery on their own? Maybe do a fresh install on one? Odd one indeed.....


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 14:34:33 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
I already did that.
The dismantled one with a 6 V external Battery, without any other cables.
A completely new fresh installing on the Goblin 380

Gents:
Please check your update.
I can not provide further investigations.
A movie, plenty of firmwareupdates....., it is not a hardware failure.

With updating on 3.2.2 the never ending story has started.

Manfred


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 14:47:18 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 962
Location: Plzeň
Manfred,
I have 4 heli. I have an RS unit on two heli (fw 3.2.2).
Radio DS12 (fw 5.05). I'm trying to duplicate your problem but I can't.
I will also try the DS16 radio in your configuration tomorrow.

link for last Jeti integration : https://spirit-system.com/dl/jeti/SPIRIT-3-2-2.zip
link for manual Jeti integration : http://manual.spirit-system.com/index.php?title=Jeti_Integration

Habasek

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 15:10:47 
Offline

Joined: Tue 14. Jul 2020 13:10:08
Posts: 18
RS Unit on Goblin 380

Flashed it back to 3.2.0

Copied (from my HD) old backup (don`t know the release) to the device folder of Jeti Ds-16

Everything is working fine on any distances (radio to unit)

I can go through all screens.

For your information.

i`ll end the investigation / trials now.

Manfred


Top
 Profile  
 
 Post subject: Re: Update 3.2.2
PostPosted: Sat 06. Feb 2021 15:12:00 
Offline

Joined: Sat 06. Feb 2021 14:59:11
Posts: 7
I also have some troubles with the Jeti integration in 3.2.2.
When I enter the Device Manager in my DS12 (FW5.03) first all menues are visible, but when I enter for e.g. the Common menue and then go back to the main page the servo menu is not more present. Also when I enter the common menue again parts of this menue are missing.
After restarting the Spirit RS-unit all menues are visible again, and so on.
The unit is still working properly, but the Jeti integration is faulty and the blue LED on the unit is blinking also after exiting the device manager.

Best regards
Klaus


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 49 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .