It is currently Thu 28. Mar 2024 13:04:08

All times are UTC + 1 hour





Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 01. Nov 2020 22:47:25 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello. We are (un)fortunately very busy due to high demand so everything is going slowly.
There is extremely small chance your unit is faulty. The RPM output of the controller could be simply incompatible with a standard sensors.
I will answer all the questions soon once we will finish the setup.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 01. Nov 2020 22:56:58 
Offline

Joined: Wed 09. Sep 2020 14:20:00
Posts: 28
Okay...
So this means you started to setup a M2 wit uSpirit already, now I’m a bit confused why setting up takes so much :)
Anyway, never mind me. Get back with some news soon. Even for a hobbyist like me, setting up a helicopter is a matter of hours...


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Mon 02. Nov 2020 11:54:56 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
It is very simple, building helicopters has much smaller priority than shipping goods to our customers.
Since we have many, many orders we have to produce goods and ship them first.

I believe you and other pilots would like to receive goods that you paid for first instead of having settings for helicopter that is used be few people.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 02. Nov 2020 12:00:46 
Offline

Joined: Wed 09. Sep 2020 14:20:00
Posts: 28
Hey man, thanks for your reply.
I would just want to clarify what are my expectations (you don’t need to do any complicated helicopter build)
- verify that P/E/A port is able to read properly the rpm sent by any ESC and specially by omphobby esc.

You can also relate with a previous post that this readings are fine with uBrain so this narrows the research quite a lot.

Is this complicated and takes a lot of time?


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Sat 07. Nov 2020 20:48:37 
Offline

Joined: Wed 09. Sep 2020 14:20:00
Posts: 28
Hi @ZeXx86

after some more testing, besides the RPM readings issue, there is another problem in this setup.
Flip and roll rates are very slow even when I go with rotation speed for cyclic at 16. It barely flips and rolls. It almost the same speed as I show in the previous video I posted. This is WAY to low.

Now, I would like to ask you if you have a time frame that you can address and fix these issues: a week, a month, a year?
That would help me decide if I continue with this unit or I simply go to something that works out of the box.


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 0:01:20 
Offline

Joined: Sat 20. Jul 2019 21:06:40
Posts: 54
are there any updates ? is M2 now configurable ?


Top
 Profile  
 
PostPosted: Mon 30. Nov 2020 14:29:59 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

yes, we were testing M2 some days ago and it is working just very well.

There is nothing special you have to do, except Head Geometry is really very unusual. So to compensate this we obtained the best results with Head Geometry 6° around 90.
Other possibility is to use Travel Adjust to correct it. Then you can leave a proper Geometry value, but easier is to lower the value.

RPM output including Governor is working flawlessly.

Settings in the attachment.


Attachments:
m2.4ds [255 Bytes]
Downloaded 39 times

_________________
Spirit System developer
Top
 Profile  
 
PostPosted: Fri 11. Dec 2020 16:30:20 
Offline

Joined: Wed 09. Sep 2020 14:20:00
Posts: 28
I am using Omphobby M2 v1 2019 model and for some reason I don`t get the rpm output readings from the ESC.

Thomas, I think you have the explore version right? which has a newer ESC version...maybe this is the problem on my side.

Is there anyone who got the RPM readings from the M2 V1 model?


Top
 Profile  
 
PostPosted: Fri 05. Mar 2021 14:57:13 
Offline

Joined: Wed 09. Sep 2020 14:20:00
Posts: 28
Hello everybody,

I decided to get back on this project. I replaced original omphobby M2 V1 ESC with V4 ESC so that I get the RPM readings.

I am also using the file provided by Thomas above.
I changed various tail parameters in order to improve the tail performance.

Now I am trying to tune the tail to work properly but I have the following Issues:

- when spooling up tail slides couple e before the motor starts spinning.
- kicks on sharp stops and collective pumps.
- pirouette is not consistent.
- left/right rudder overshoots
Here are my settings:
Attachment:
1.png
1.png [ 28.16 KiB | Viewed 198 times ]

Attachment:
2.png
2.png [ 19.91 KiB | Viewed 198 times ]

Attachment:
3.png
3.png [ 22.41 KiB | Viewed 198 times ]

http://www.youtube.com/watch?v=1iAIWpMDphs


Top
 Profile  
 
PostPosted: Sat 06. Mar 2021 17:18:34 
Offline

Joined: Sat 20. Jul 2019 21:06:40
Posts: 54
just want to add that - pirouettes with motor tail are really a problem - there is no stabilization / consistency at all.
But hopefully there will be soon a recommendation of tail motor parameters - with provided M2 file I'm also not happy...but run out of ideas which parameter to change.
Tomas, can you please check and do some pirouettes with one of your motor tail helis. Must not be M2, can be Logo 200, Blade 150 /230S as well ;-)

Courious if the problem is really on our end ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .