Spirit System
https://www.spirit-system.com/phpBB3/

Ix12 and Spm4649t
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4066
Page 1 of 1

Author:  Pino74 [ Tue 16. Jun 2020 8:46:16 ]
Post subject:  Ix12 and Spm4649t

Hello everyone

I have Hw esc 60 amp V4 Platinium and Spirit pro. The connection between the receiver Spm4649t and Spirit Pro(last firm) is correct. The rpms work with telemetry

does anyone have an Ix12 and an spm 4649t? the total volts of the battery work on the telemetry? with the ix12 it stopped working, with the dx8 gen2 I didn't have this problem

he connection between the sensor of the receiver and the battery is correct.I checked.On my ix12 I also made the self-configuration of the telemetry, but the volt are always zero, as if the spm4649t was not compatible with the ix12.rpms work well .only the volts. on my old dx8gen2 everything worked.

Thanks

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/