It is currently Thu 28. Mar 2024 23:06:59

All times are UTC + 1 hour





Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 06. Jun 2020 14:58:46 
Offline

Joined: Sat 06. Jun 2020 14:50:22
Posts: 17
Hi,
getting my new RS - so one little problem.
In the device explorer I cant enter the REX-RS settings (unable to open configuration), the spirit settings are available.
And in the heli tuning menu the spirits settings are not displayed, so you have to open the spirits settings via the device
explorer.

Firmware RS: 3.1
Jeti DC16 V1 (5.03)

Any tips for that ?
Thank you :-)


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 16:24:40 
Offline
User avatar

Joined: Wed 20. Jan 2016 20:23:36
Posts: 17
Location: DFW Texas
Do you have the proper jeti.bin and the images file? Everything should be version 3.1.

Dan

_________________
Synergy 516, 556 stretch, 696.


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 16:48:54 
Offline

Joined: Sat 06. Jun 2020 14:50:22
Posts: 17
Perhaps it is the transmitter software, it is 5.03, but Jeti Studio said there is a newer one, I will update and report again..


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 17:43:16 
Offline

Joined: Mon 03. Sep 2018 11:43:07
Posts: 26
Hallo,
the software 5.03 does not have the rex3rs.bin also not with it.
I hope Tomas can provide these too.

Gerald


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 17:54:22 
Offline

Joined: Sat 06. Jun 2020 14:50:22
Posts: 17
Still no luck :cry:
Update to the newest Transmitter software, copied the newest spirit.bin
No, i dont have a rex3rs.bin - where can i get that file ?


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 19:19:42 
Offline

Joined: Tue 21. Jan 2020 11:28:04
Posts: 78
Till wrote:
Still no luck :cry:
Update to the newest Transmitter software, copied the newest spirit.bin
No, i dont have a rex3rs.bin - where can i get that file ?


Same here - no access to the Rx part of the RS unit........I'm looking at the Spirit RS manual (3.1) and the pictures shown are different from what I have on my Tx (DS-12). I have the Spirit-3-1.zip file, extracted and copied to the Devices folder in the Tx. There's no Rex3RS.bin file associated.

Cheers, Andy


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 20:12:31 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

required file will be available on monday.

But there is nothing needed to set if you dont need a backup receiver.

Firmware for radios are not available yet oficially. Only in radios from our store. But it will be released shortly.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 21:04:22 
Offline

Joined: Tue 21. Jan 2020 11:28:04
Posts: 78
ZeXx86 wrote:
Hello,

required file will be available on monday.

But there is nothing needed to set if you dont need a backup receiver.

Firmware for radios are not available yet oficially. Only in radios from our store. But it will be released shortly.
Thanks, Tomas.

I want to use a MUI EX sensor with the Spirit RS, connected at the EX port. I believe I need the EXT port for the RPM signal from ESC.

When connecting a sensor to a REX3 receiver I have needed to configure the receiver port for the sensor, and assume I need to do the same with the RS. I tried connecting it and then selecting AUTO in telemetry / sensor setup, but it doesn't detect it.

I can certainly wait till Monday for the file. Thanks again,
Andy

Sent from my SM-T510 using Tapatalk


Top
 Profile  
 
PostPosted: Sat 06. Jun 2020 23:17:09 
Offline

Joined: Sat 06. Jun 2020 14:50:22
Posts: 17
And we need the access to set the correct filesave positions.

>In the Basic Properties menu select Heli to Spirit and continue to another page. (Please note transmitter update 5.04 is required for this option - only available in DS-12 Spirit Edition at the moment).
Thank you to make that clear.

Monday is perfect - because it is raining heavily here :?


Top
 Profile  
 
PostPosted: Mon 08. Jun 2020 17:43:24 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

here is updated archive with required files:
http://spirit-system.com/dl/jeti/SPIRIT-3-1-RS.zip

All will work after copying at the Devices directory.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .