| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Futaba Telemetry - R3004SB T-FHSS receiver https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3737 |
Page 1 of 1 |
| Author: | dshriver [ Sat 25. Jan 2020 5:56:56 ] |
| Post subject: | Futaba Telemetry - R3004SB T-FHSS receiver |
Hello, I can't seem to get the telemetry to work with my R3004SB T-FHSS receiver. The receiver is an S.Bus2 receiver. I'm using the Spirit S.Bus2 cable. Control works just fine. When I bind the receiver it does add the telemetry sensors starting at port 8. However, I never get any telemetry data except RX voltage. To test my wiring, I tried using an R7008SB FASSTest receiver on the S.Bus2 port and the telemetry worked fine, as expected. For more testing, I tried connecting a Futaba temp. sensor to the S.Bus2 port of the R3004SB and it gave me telemetry values, so I know that the telemetry does work on this receiver. Is Spirit telemetry not compatible with the Futaba R3004SB receiver? |
|
| Author: | ZeXx86 [ Sat 25. Jan 2020 9:50:19 ] |
| Post subject: | Re: Futaba Telemetry - R3004SB T-FHSS receiver |
Hello, telemetry will work only with FASSTest modulation. |
|
| Author: | dshriver [ Sat 25. Jan 2020 13:11:18 ] |
| Post subject: | Re: Futaba Telemetry - R3004SB T-FHSS receiver |
Why? T-FHSS is fully telemetry capable. Are there plans for T-FHSS telemetry support? |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|