It is currently Fri 29. Mar 2024 2:25:26

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 26. Dec 2019 11:53:23 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
Hi, and Merry Christmas.

I received a micro Spirit for Christmas that I plan to use with a HW 25 Platinum ESC, I have bought the Telemetry cable and will be running into an FRSky R-XSR receiver (I have a similar set-up using an original Spirit and a HW 50 on my 450).

A couple of questions - when I run the Telemetry into the SAT port and the ESC / BEC into the AUX port this will give me two 6V feeds (as the ESC also outputs the selected voltage through the Telemetry port - at least it does on it's bigger brothers) - will having two 6v feeds be an issue?? If it is, should I use the feed on the Telemetry port (bigger connectors) or the ESC / BEC feed???

Thanks,
Mike.


Top
 Profile  
 
PostPosted: Thu 26. Dec 2019 12:39:59 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

Telem UNI is designed to not feed any voltage to the SAT port. Otherwise this would destroy the unit.
Any way telemetry port is not recommended for powering. So if you are using wiring described in the manual there will be no issue.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Dec 2019 12:51:40 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
ZeXx86 wrote:
Hi,

Telem UNI is designed to not feed any voltage to the SAT port. Otherwise this would destroy the unit.
Any way telemetry port is not recommended for powering. So if you are using wiring described in the manual there will be no issue.


OK - so I just disconnect the Positive wire on the Telem port - thanks for the quick answer

I'll re-read the manual before preceeding


Top
 Profile  
 
PostPosted: Sat 28. Dec 2019 8:39:16 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
Tomas - another question I'm afraid - I really don't want to damage my micro Spirit

If I connect the integration cable leaving the red lead connected to my R-XSR, will this cause a problem - with this put power through the Integration cable into the SYS port??

Thanks,
Mike


Top
 Profile  
 
PostPosted: Sat 28. Dec 2019 10:40:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

the FrSky integration cable will not feed any voltage to the unit. The red cable from side of the receiver is used only for powering the electronics inside. But red cable from side of the unit is for communication purposes.
So with this cable you do not have to worry. The red cables must be connected from both sides in this case.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 28. Dec 2019 11:15:58 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
ZeXx86 wrote:
Hello,

the FrSky integration cable will not feed any voltage to the unit. The red cable from side of the receiver is used only for powering the electronics inside. But red cable from side of the unit is for communication purposes.
So with this cable you do not have to worry. The red cables must be connected from both sides in this case.


Excellent - thanks for explaining


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .