It is currently Fri 29. Mar 2024 9:21:49

All times are UTC + 1 hour





Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 03. Dec 2014 15:02:57 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
By the way, can you confirm that after the bind process is complete then LED on the unit should be turned off, does it happened?
In case it is not turned off, then binding process was not succesfull for the unit.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 03. Dec 2014 15:27:22 
Offline

Joined: Thu 16. Oct 2014 20:31:11
Posts: 24
Now that is interesting. My led on the spirit unit dims or pulses and then stays lit brightly after binding and does the same thing on all subsequent power ups. It never extinguishes when the unit is powered.


Top
 Profile  
 
PostPosted: Wed 03. Dec 2014 15:44:02 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hmm, that means that incoming data can't be processed for some reason.

Is your channel mapping in the TX in default?
Could you try to start the helicopter with throttle hold off, pitch stick in the center?

If even that will not help, than it seems as some problem in the unit. In this case you can send it to us if possible.
In case we can't find the reason for the problem we will ship you new unit for free.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 03. Dec 2014 16:01:01 
Offline

Joined: Thu 16. Oct 2014 20:31:11
Posts: 24
ok powering on with mid stick did not work. The diagnostic tab always shows throttle at -1% and it is of course unresponsive just like the other channels.
My channel assignments in the dx9 are as follows:
1: Throttle
2: Aileron
3: Elevator
4: Rudder
5: gear
6: Aux1:pitch
7:Aux2
8:Aux3
9:Aux4


Top
 Profile  
 
PostPosted: Wed 03. Dec 2014 16:18:17 
Offline

Joined: Thu 16. Oct 2014 20:31:11
Posts: 24
I just changed to 22ms frame rate and dsm2 in transmitter and tried binding with the bind plug in the sys port instead of ele/pit/ail port but unfortunately the spirit led remained lit despite the bind seeming to work for the transmitter and the sat.


Top
 Profile  
 
PostPosted: Mon 08. Dec 2014 14:41:45 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
Any further on this Eddie?


Top
 Profile  
 
PostPosted: Mon 08. Dec 2014 14:53:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
We are in contact with Ed, he is sending the unit to us so we can examine it carefully.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .