It is currently Thu 28. Mar 2024 23:31:33

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: [SOLVED] S.bus cable
PostPosted: Fri 17. Oct 2014 12:10:17 
Offline

Joined: Sat 27. Sep 2014 2:56:37
Posts: 53
Could someone please explain to me what the inverter in the s.bus cable does? Is it a voltage regulator like in the sat's cable? Most bec won't go above 9v and spirit can handle up to 15. So why not a straight cable with no inverter?


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Fri 17. Oct 2014 13:20:11 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Invertor cable purpose is to invert logic signal which is coming from s-bus output. This is because Futaba is only manufacturer which inverts serial signal. It only modifies data which are going through the orange wire.
BEC voltage does not play any role there.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Fri 17. Oct 2014 15:15:32 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
Tomas,

What is the difference between the Tarot one and the new SBus inverter you are offering? I am currently using the Tarot one without issue, is there something I should be concerned about with it?


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Fri 17. Oct 2014 17:34:54 
Offline

Joined: Sat 27. Sep 2014 2:56:37
Posts: 53
ZeXx86 wrote:
Invertor cable purpose is to invert logic signal which is coming from s-bus output. This is because Futaba is only manufacturer which inverts serial signal. It only modifies data which are going through the orange wire.
BEC voltage does not play any role there.


ok, I understand. I want to connect in s.bus mode but using an Frsky Taranis, and not any futaba. Do you know if Frsky's s.bus also inverts the signal? If it doesn't then I guess any plain servo lead would do the job, right?


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Fri 17. Oct 2014 17:50:41 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
Yes frsky uses the same signal inversion as futaba


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Fri 17. Oct 2014 17:55:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Jman841 wrote:
Tomas,

What is the difference between the Tarot one and the new SBus inverter you are offering? I am currently using the Tarot one without issue, is there something I should be concerned about with it?

Difference is only in construction, but functionality is same. Our invertor should be more reliable in various conditions (for example high or too low voltage). But for most people there is no difference in regards to signal processing.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: S.bus cable
PostPosted: Sat 18. Oct 2014 20:16:00 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
ok awesome.

Once the new update comes out and I can run power directly into the FBL instead of into the Rx and having to go through the inverter cable to power the unit, the Tarot one should be fine.

Is there any issue with having one power lead directly into the FBL and one directly into the Rx?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Robbytobby and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .