| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Futaba S-Bus https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=288 |
Page 1 of 1 |
| Author: | Jman841 [ Sat 04. Oct 2014 14:00:32 ] |
| Post subject: | [SOLVED] Futaba S-Bus |
Hello, I just switched from using DSM2/X Sat's to using FrSky x4R-SB rx's running S-Bus. The switch was pretty simple and everything is working perfect except for my throttle channel. My ESC (HW Platinum V3 50a) is doing a slow 2 second beep after startup, indicating it is not receiving a signal from the unit. Everything else is working perfect except the throttle signal. Unfortunately, the Spirit Software does not show the throttle channel for some reason which would help a lot in diagnosing this issue. My Tx is showing that channel 3 (Throttle channel on FASST) is outputting a signal and the pitch is linked directly to the throttle which is working correctly. I can not figure out why the ESC is not seeing a throttle signal. When I put the DSM2 Sat in and use the old transmitter, changing nothing else, all is fine. Any idea's? |
|
| Author: | Jman841 [ Sat 04. Oct 2014 14:14:25 ] |
| Post subject: | Re: Futaba S-Bus |
Got it! Throttle channel has to be plugged directly into the Rx. |
|
| Author: | ZeXx86 [ Sat 04. Oct 2014 14:23:31 ] |
| Post subject: | Re: Futaba S-Bus |
Great, with following version you will be able to plug it to either rx or the unit. |
|
| Author: | Jman841 [ Sat 04. Oct 2014 16:11:48 ] |
| Post subject: | Re: Futaba S-Bus |
Awesome! I will prefer that so I can have the ESC power right to the unit. i could pull the pins out and put it there now but easier to just wait. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|