Spirit System • View topic - [SOLVED] Bailout failed

It is currently Fri 26. Apr 2024 0:45:18

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

[SOLVED] Bailout failed

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

ChrisTTian667

Post subject: [SOLVED] Bailout failed

Posted: Fri 03. Oct 2014 18:12:19

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel

Hey Guys,

I tried the spirit today in my trex 550. I tried the bailout for 2-3 times and it worked very well. But after a few tries, the bailout was up side down. As i activate it, the heli went down to earth. Wth?? Is it a bug in the System, or can i check some parameters?

Best regards.

P.s. Its the newest Software on the device.

Top

ZeXx86

Post subject: Re: Bailout failed

Posted: Fri 03. Oct 2014 18:19:38

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12234

Hello,

you should check pirouette optimization first as stated in the software and manual.
This is main reason why the rescue could fail. Pirouette optimization has to be configured properly.
If you are sure that this parameter is OK, then you can check other things.
For example if the unit is aligned to all axes precisely.

Don't worry, we are testing it for few years.

If all is correct, it will work very well.

_________________
Spirit System developer

Top

ritchieicu

Post subject: Re: Bailout failed

Posted: Fri 03. Oct 2014 23:26:13

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90

How are you powering the unit?

Top

ChrisTTian667

Post subject: Re: Bailout failed

Posted: Fri 03. Oct 2014 23:39:17

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel

Hey, i will check piroette optimization tomorrow morning. Ty

The unit is powered via 2 cables from rx. And the rx is connected via 2 power lines from an external 12/20A bec. So, i think that should be fine.

Top

ritchieicu

Post subject: Re: Bailout failed

Posted: Sat 04. Oct 2014 9:40:48

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90

ChrisTTian667 wrote:

Chris, let us know how it goes please

Top

Jman841

Post subject: Re: Bailout failed

Posted: Sat 04. Oct 2014 13:56:08

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215

Make sure the unit:

- initialized on a flat stable surface
- Adequate power to support a huge cyclic/collective movement on all servos
- Piro Optimization is configured correctly
- Pre-flight checks are done
- The swash direction is going the right way on the bench, if not you have to go into negative values on the pitch slider for rescue.

Top

ChrisTTian667

Post subject: Re: Bailout failed

Posted: Sat 04. Oct 2014 21:49:28

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel

I think pyro optimization was wrong. But since i crashed today, i have to wait till tuesday for the parts. Then i will give it another try.

Ty guys!

Top

ChrisTTian667

Post subject: Re: Bailout failed

Posted: Wed 22. Oct 2014 8:52:57

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel

It was the pyro optimization.
I forget to double check it after i reverted the roll.

So, sorry guys, that was my fail!!

Top

ritchieicu

Post subject: Re: Bailout failed

Posted: Wed 22. Oct 2014 9:29:39

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90

Thanks for the update Chris

Top

Page 1 of 1

[ 9 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: