Spirit System • View topic

It is currently Sat 11. May 2024 23:25:32

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Power supply

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Clinton

Post subject: Power supply

Posted: Thu 24. Nov 2016 16:21:31

Joined: Wed 24. Aug 2016 11:46:57
Posts: 2

Hi guys. I've got my first pro which I am going to install on a logo 600. I'm using the ar9020 srxl connection . I have two leads coming from the kontronic esc for power. One goes to the throttle on receiver. Do I put both in receiver or one to the fbl unit. Or both to the fbl unit.I will be using the kontronic governor. Thanks in advance

Top

ZeXx86

Post subject: Re: Power supply

Posted: Thu 24. Nov 2016 21:38:33

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12248

Hi Clinton!

All the combinations that you have mentioned will work.
But to avoid ground loops, the best way is to connect throttle directly to the unit and second lead of the BEC too.
So AUX1 and AUX2 will be for throttle input and powering.

Receiver can be connected just with a single cable as it require very small current.

Alternatively you can connect BEC and throttle to the receiver and use two cables connected to the unit.

_________________
Spirit System developer

Top

Page 1 of 1

[ 2 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: leatherface and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: