Spirit System
https://www.spirit-system.com/phpBB3/

How to hookup bluetooth to red unit
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1086
Page 1 of 1

Author:  Alyon187 [ Wed 09. Dec 2015 9:00:29 ]
Post subject:  How to hookup bluetooth to red unit

Ive got a spare generic bluetooth that I used on mt vbar and believe will work but I dont know where to connect what pins. Ideas?

Author:  ZeXx86 [ Wed 09. Dec 2015 12:21:21 ]
Post subject:  Re: How to hookup bluetooth to red unit

Hello,

you can connect module to the unit, but you have to reprogram it for Baudrate 57600 else it will not work. VBar has different baud rate.
Maybe this scheme will help you.

Attachments:
btscheme.png
btscheme.png [ 81.46 KiB | Viewed 812 times ]

Author:  Alyon187 [ Thu 10. Dec 2015 3:16:45 ]
Post subject:  Re: How to hookup bluetooth to red unit

Ok thanks Tomas. I went ahead and ordered a bt module from you guys. One more quick question, ive got a hw 100a v3 on my goblin 380 and only use the throttle/bec cable connected to the red unit so ive got the other bec cable just secured to the frame. Could I use that extra cable to power the bt unit and then the other bt connector to the system port?

Author:  ZeXx86 [ Thu 10. Dec 2015 8:18:50 ]
Post subject:  Re: How to hookup bluetooth to red unit

Yes,

this will work fine. You will only need adaptor to connect both servo cables together, because both are with same end.

Author:  Adrian [ Thu 10. Dec 2015 9:04:44 ]
Post subject:  Re: How to hookup bluetooth to red unit

use a servo V-cable. Edit: Y-Cable 8-)

Author:  Alyon187 [ Thu 10. Dec 2015 13:48:49 ]
Post subject:  Re: How to hookup bluetooth to red unit

Thanks Tomas.


Do you mean a Y cable? Never heard of a v cable.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/