Spirit System https://www.spirit-system.com/phpBB3/ |
|
OpenTx integation does not work https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2944 |
Page 7 of 7 |
Author: | ZeXx86 [ Tue 19. Mar 2019 15:05:22 ] |
Post subject: | Re: OpenTx integation does not work |
Hello, please redownload the firmware from same URL and try it again. I believe it will work now. |
Author: | Carthago [ Tue 19. Mar 2019 16:12:43 ] |
Post subject: | Re: OpenTx integation does not work |
Hello Tomáš, new try with new download, but no changes to former behavior - led out and no lua function. Regards, Toni |
Author: | denis747 [ Tue 19. Mar 2019 18:41:01 ] |
Post subject: | Re: OpenTx integation does not work |
ZeXx86 wrote: FrSky replied today that they are very busy but will give us a proper reply soon. In the meantime we have prepared workaround, hopefully this firmware will help: http://spirit-system.com/dl/fw/spirit-fw-2.6.2.4df It is identical with 2.6.1 except small change in the firmware for these FrSky receivers. It works! ![]() Thanks Tomas! |
Author: | denis747 [ Tue 19. Mar 2019 20:39:04 ] |
Post subject: | Re: OpenTx integation does not work |
Here is a video of Rx8r Pro working properly with Spirit integration after updating Spirit with the new firmware that Tomas gave https://youtu.be/6vSLM5BzdEE |
Author: | Carthago [ Wed 20. Mar 2019 10:18:52 ] |
Post subject: | Re: OpenTx integation does not work |
Hello, after a new download this morning it works properly here with me too - maybe I was too fast with downloading the second version yesterday and got first again. Many thanks to Tomáš! Regards, Toni |
Author: | duckforeman [ Thu 21. Mar 2019 1:30:05 ] |
Post subject: | Re: OpenTx integation does not work |
I got the chance to try it myself this evening and can confirm that it works fine here. Thanks for that Tomas. I await with interest to see what FrSky come back with. Cheers Chris |
Author: | denis747 [ Thu 24. Oct 2019 23:26:16 ] |
Post subject: | Re: OpenTx integation does not work |
Hi, Tomas, this now doesn't work with the new Spirit 2. It is exactly the same behaviour, that is if you start the LUA first then power on the Spirit 2 then it works. If you just power on the Spirit 2 unit before starting the integration LUA on the Tx then nothing works and the Spirit 2 LED light turns off. Exact same behaviour as happened with the old Spirit units and FrSky Rx8R pro before you fixed it. I thought it was something to do with the latest firmware version 2.6.4 but it isn't as I also have a Spirit Pro that I updated to version 2.6.4 and telemetry/integration works fine on that with the same FrSky Rx8R Pro receiver (I uploaded the firmware that you issued to fix it on the old Spirits a while back, maybe the Spirit 2 needs something like that?). FrSky didn't have a clue how to fix this but you fixed it on the old Spirit units. So I would be grateful if you could with this new Spirit 2 unit. Thanks. |
Author: | ZeXx86 [ Fri 15. Nov 2019 13:14:29 ] |
Post subject: | Re: OpenTx integation does not work |
Hello, the problem was resolved definitively. Fix will be available in the update next week. |
Author: | denis747 [ Fri 15. Nov 2019 16:11:17 ] |
Post subject: | Re: OpenTx integation does not work |
Thanks Tomas. I have been using a FrSky R-xsr for now in redundancy configuration with a Frsky xm+, just to get integration, on the 550X but I will put the Rx8R Pro back on once the update is available. I trust the Rx8r pro more on a large heli. |
Page 7 of 7 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |