It is currently Thu 28. Mar 2024 14:59:57

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 26. Oct 2022 10:48:21 
Offline

Joined: Wed 08. Jan 2020 0:21:54
Posts: 28
Hi all, is the Spirit capable of electronic phasing on a multi blade scale helicopter?


Top
 Profile  
 
PostPosted: Wed 26. Oct 2022 13:16:35 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

yes, see our manual:
https://manual.spirit-system.com/index. ... T_SETTINGS

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 27. Oct 2022 10:48:53 
Offline

Joined: Wed 08. Jan 2020 0:21:54
Posts: 28
Thank you! I knew it could do it I just couldn't find it in the software. It's called cyclic phase :)


Top
 Profile  
 
PostPosted: Mon 05. Dec 2022 4:38:03 
Offline

Joined: Sat 03. Dec 2022 21:55:17
Posts: 12
Is the phasing accessible for a two blades model to retard swash phasing a bit for more axial rolls? It seems to be greyed out on my screen.

Ben Minor


Top
 Profile  
 
PostPosted: Mon 05. Dec 2022 8:25:08 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 352
Hi Ben

is it possible that you are NOT in bank 0 when trying to change the value?

_________________
cheers
Michael


Top
 Profile  
 
PostPosted: Tue 06. Dec 2022 3:57:13 
Offline

Joined: Sat 03. Dec 2022 21:55:17
Posts: 12
Edited. Problem solved. I wasn't thinking correctly about the phasing output with an ele input. All is well. What I had written would only serve to confuse.


Last edited by Dr.Ben on Wed 07. Dec 2022 5:50:07, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue 06. Dec 2022 7:51:10 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 352
Dr.Ben wrote:
Michael,

Thank you for your reply. I found it to be active, but now I am quite confused. ......


Hi Ben, i am just a user here as you are - i cannot explain ;) so it's a question for @ Tomas !

_________________
cheers
Michael


Top
 Profile  
 
PostPosted: Tue 06. Dec 2022 8:16:26 
Offline

Joined: Sat 03. Dec 2022 21:55:17
Posts: 12
Thanks Michael. I emailed Tomas and asked for his comment here and on a post I had made about cyclic tuning.

Ben Minor


Top
 Profile  
 
PostPosted: Tue 06. Dec 2022 8:38:04 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

cyclic phasing should work identically on all models and FBL units.
It is working in the way where swashplate movements are rotated in one or another way by degrees you will enter.
Both axes are rotated always in the same direction, otherwise it does not make sense.

If you are getting incorrect behavior then it mean that your basic setup is not correct unfortunately.
You can check it easily in this way:
1) Enable normal flight mode
2) Move with collective pitch up and down
3) Check Diagnostic tab if the Pitch bar is moving up and down in the same direction as your stick.
4) Check that you have correct Swashplate Type

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 07. Dec 2022 5:50:56 
Offline

Joined: Sat 03. Dec 2022 21:55:17
Posts: 12
Thank you Tomas. My issue is resolved and all is well.

Ben Minor


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .