New version 3.6.0 released!
- New OMP M4 ESC telemetry support:
- Full support for OMPHobby ESC telemetry.
- See wiring and settings at the Wiki page
- New Spirit Settings software look:
- Spirit Settings is running atop new GUI library for all Operating Systems.
- You can access Manual pages easily by clicking at the left Panel icon. It will open corresponding manual page depending on Tab that is selected.
- You can open Forum for asking a question directly from the software now.
- Spirit Settings software will show you an important Event at the Connection tab without opening Flight Log.
- ESC telemetry in the Spirit Settings:
- Spirit Settings can display ESC telemetry values directly in the software now - Advanced/ESC Telemetry window.
- All telemetry enabled ESCs can be interfaced with Spirit units also with Radio System that has no telemetry support.
- Enhanced Spirit RX receiver support:
- Full support for Spirit Radio System.
- Wave Receivers can be easily flashed from the Spirit Settings software.
- Full support for upcoming Spirit W1 units:
- Brand new Spirit units with integrated Wave receiver can be used from this update.
- Spirit W1 can be also used with all other external receivers - same as standard Spirit units allowing easy transition.
- Rescue - Automatic:
- New parameter Rescue Automatic - Duration.
- Parameter can control how long the Automatic Rescue will push the model upwards after reaching Rescue Altitude.
- GeoLink - Altitude Limit:
- New parameter Rescue Automatic - Duration will affect also Altitude Limit function.
- Parameter can control how long the Automatic Rescue will push the model upwards after reaching Rescue Altitude.
- GeoLink - Position Hold:
- Position Hold was improved for easier steering.
- Sticks Priority parameter will affect steering rate now.
- GeoLink v2 module - Static discharges:
- GeoLink v2 modules are much more tolerant for a static discharges now.
- In case of major event when module can't operate automatic recovery will trigger and it will continue in operation without interruption.
- GeoLink v2 module - Logging:
- Fixed random logging problem when Log entries were missing.
- When module is logging in the air Blue Status LED will be flashing each second.
- GeoLink v2 module - Connection:
- Fixed random inability to enter the GeoLink HW settings and Map data in the Spirit Settings.
- GeoLink v2 module - Altitude measurement:
- Altitude will not reset from now.
- Instances when it was resetted during flight causing imprecision of Altitude related features are avoided.
- Spektrum SRXL2 major changes:
- Spektrum SRXL2 support was improved to better operate with multiple SRXL2 receivers/satellites connected at the same time.
- Spektrum Integration and Telemtry can now work without interruption from any SRXL2 receiver or satellite.
- When signal is lost there is no delay when switching to other active receiver.
- Spektrum SRXL2 receiver binding:
- Spektrum SRXL2 receivers and satellites can be all bound by pressing CTRL + B shortcut when running the Spirit Settings software.
- Receivers that were already bound can be left without any change. No need for repeated binding.
- Spektrum Integration:
- Integration menu will be not blank after prolonged inactivity period.
- Added missing ESC telemetry options in the menu.
- Added missing Stabi/Function options in the menu.
- HoTT Integration:
- Added missing ESC telemetry options in the menu.
- Added missing Stabi/Function options in the menu.
- Added new protocol JR XBUS mode A:
- Brand new protocol for native support of JR XBUS receivers.
- Telemetry support will be availble in next updates.
- HobbyWing v5 ESC telemetry bug fix:
- Fixed current and capacity measurement with certain 150A v5 models.
Update for the Spirit units, GeoLink v2, Wifi-Link, JETI integration is available for download.
NOTE: No settings changes are needed after update from 3.5.0.
|