It is currently Mon 07. Oct 2024 8:29:36

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 29. Nov 2023 11:03:07 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12395
New version 3.6.0 released!


  • New OMP M4 ESC telemetry support:
    • Full support for OMPHobby ESC telemetry.
    • See wiring and settings at the Wiki page
  • New Spirit Settings software look:
    • Spirit Settings is running atop new GUI library for all Operating Systems.
    • You can access Manual pages easily by clicking at the left Panel icon. It will open corresponding manual page depending on Tab that is selected.
    • You can open Forum for asking a question directly from the software now.
    • Spirit Settings software will show you an important Event at the Connection tab without opening Flight Log.
  • ESC telemetry in the Spirit Settings:
    • Spirit Settings can display ESC telemetry values directly in the software now - Advanced/ESC Telemetry window.
    • All telemetry enabled ESCs can be interfaced with Spirit units also with Radio System that has no telemetry support.
  • Enhanced Spirit RX receiver support:
    • Full support for Spirit Radio System.
    • Wave Receivers can be easily flashed from the Spirit Settings software.
  • Full support for upcoming Spirit W1 units:
    • Brand new Spirit units with integrated Wave receiver can be used from this update.
    • Spirit W1 can be also used with all other external receivers - same as standard Spirit units allowing easy transition.
  • Rescue - Automatic:
    • New parameter Rescue Automatic - Duration.
    • Parameter can control how long the Automatic Rescue will push the model upwards after reaching Rescue Altitude.
  • GeoLink - Altitude Limit:
    • New parameter Rescue Automatic - Duration will affect also Altitude Limit function.
    • Parameter can control how long the Automatic Rescue will push the model upwards after reaching Rescue Altitude.
  • GeoLink - Position Hold:
    • Position Hold was improved for easier steering.
    • Sticks Priority parameter will affect steering rate now.
  • GeoLink v2 module - Static discharges:
    • GeoLink v2 modules are much more tolerant for a static discharges now.
    • In case of major event when module can't operate automatic recovery will trigger and it will continue in operation without interruption.
  • GeoLink v2 module - Logging:
    • Fixed random logging problem when Log entries were missing.
    • When module is logging in the air Blue Status LED will be flashing each second.
  • GeoLink v2 module - Connection:
    • Fixed random inability to enter the GeoLink HW settings and Map data in the Spirit Settings.
  • GeoLink v2 module - Altitude measurement:
    • Altitude will not reset from now.
    • Instances when it was resetted during flight causing imprecision of Altitude related features are avoided.
  • Spektrum SRXL2 major changes:
    • Spektrum SRXL2 support was improved to better operate with multiple SRXL2 receivers/satellites connected at the same time.
    • Spektrum Integration and Telemtry can now work without interruption from any SRXL2 receiver or satellite.
    • When signal is lost there is no delay when switching to other active receiver.
  • Spektrum SRXL2 receiver binding:
    • Spektrum SRXL2 receivers and satellites can be all bound by pressing CTRL + B shortcut when running the Spirit Settings software.
    • Receivers that were already bound can be left without any change. No need for repeated binding.
  • Spektrum Integration:
    • Integration menu will be not blank after prolonged inactivity period.
    • Added missing ESC telemetry options in the menu.
    • Added missing Stabi/Function options in the menu.
  • HoTT Integration:
    • Added missing ESC telemetry options in the menu.
    • Added missing Stabi/Function options in the menu.
  • Added new protocol JR XBUS mode A:
    • Brand new protocol for native support of JR XBUS receivers.
    • Telemetry support will be availble in next updates.
  • HobbyWing v5 ESC telemetry bug fix:
    • Fixed current and capacity measurement with certain 150A v5 models.

Update for the Spirit units, GeoLink v2, Wifi-Link, JETI integration is available for download.

NOTE: No settings changes are needed after update from 3.5.0.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 30. Nov 2023 14:47:43 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12395
We released new update for GeoLink v1 modules right now.

There are slight improvements in the performance and also connection stability.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .