It is currently Thu 07. Nov 2024 14:50:06

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 03. May 2024 10:05:40 
Offline

Joined: Thu 28. Dec 2023 15:56:01
Posts: 10
Location: Napoli - Italy
Good morning,
I'm setting up a 400 class helicopter with Spirit2. After the mechanical setup, I moved on to the SW setup.
I have done everything in the manual and in the end I am left with the corners and etc.

However, something happens that I hadn't noticed even with my other helicopters before this one.

In particular it concerns the travel of the sticks vs the travel of the servo controls.

Collective: The collective goes from -12° to +12° which corresponds to the command -100 to +100 (all ok).

Cyclic: The cyclic command goes from -10° to +10° (modifiable as a step) but on the stick it goes from -50 to 0 and from 0 to +50. That is, from -50 to -100 the servos do not move (they do not work under force) and the same thing on the positive side (+51 to +100).

Question: Is this behavior of the cyclic correct?
Did I miss something in the manual?

Thanks for the confirmation


Top
 Profile  
 
PostPosted: Mon 06. May 2024 10:05:34 
Offline

Joined: Sun 19. Nov 2023 17:12:58
Posts: 5
Hello,
I seem to have the same question, but wrote it in the English forum.
viewtopic.php?f=20&t=6076#p42707
Thank you all for your support.

Kind regards
Carsten


Top
 Profile  
 
PostPosted: Mon 06. May 2024 15:48:53 
Offline

Joined: Thu 28. Dec 2023 15:56:01
Posts: 10
Location: Napoli - Italy
Thank you for answering,
I read the post that ok let's say the extension is on the flight ok.

I ask because I have a problem with the log which is the following:

Checking the log after each flight I have the following:
- Flight 1: I tried just hovering using the Ale/Ele stick very little (mode 2) and checking the log everything is ok.
- Flight 2: I tried to make a straight line with very light turns (tail rotation) and checking the log everything is ok.
- Flight 3: I tried to make a loop (Idleup 1) it gives me (after many "Good Health Messages") an error "Cyclic Ring Activated" followed by "Good Health Message".

From here the verification of the travel of the right sticks Vs "Ale/Ele" was born.

I'm worried about the "Cyclic Ring Activated" message.

This problem is present on both the M4 and M4Max and both are equipped with: "Spirit2" - "Spektrum DSMx rx" - "Radiomaster Boxer".

The setup is according to manual and the inclinations are:
Collective: +/- 12°
Ale/Ele: +/-11°
Max picth range

Thanks in advance for a reply


Top
 Profile  
 
PostPosted: Tue 07. May 2024 6:24:32 
Offline

Joined: Thu 28. Dec 2023 15:56:01
Posts: 10
Location: Napoli - Italy
Good morning,
maybe I solved the problem with OMPHOBBY M4Max.
By changing some parameters and viewing the log after a flight, the "Cyclic Ring Activated" error no longer appears.

Only "Tail Rudder Limit Reached" remains but that is at the beginning of the flight and at the end of the flight. I think it refers to when I pick it up to take it to the runway and when I pick it up at the end of the flight.

For the M4 it has a problem with the tail but maybe I figured out what it is.

Thanks for everything.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .