It is currently Fri 29. Mar 2024 10:38:33

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 27. Sep 2021 13:47:47 
Offline

Joined: Tue 08. Jun 2021 19:53:26
Posts: 24
I have a new Spirit GT and cannot get telemetry data for the RPM to the Spirit GT. I have successfully done it with a 120 Amp HobbyWing, by moving the Orange RPM wire from the top of the connector to the middle socket.

I have Live Link activated in the Castle 160HV and also the RPM Out activated. I have tested using the Orange RPM wire with both the top socket and the middle socket of the connector with no luck.

Any thoughts and recommendations are greatly appreciated.

All the best,

Ken


Top
 Profile  
 
PostPosted: Mon 27. Sep 2021 16:27:36 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
have you checked the governor manual page ?

http://manual.spirit-system.com/index.p ... RPM_output


Top
 Profile  
 
PostPosted: Mon 27. Sep 2021 23:57:34 
Offline

Joined: Tue 08. Jun 2021 19:53:26
Posts: 24
Thanks for the link. It is unfortunate that I have tried all these remedies.

Any other thoughts would be appreciated.

All the best,

Ken


Top
 Profile  
 
PostPosted: Tue 28. Sep 2021 0:19:39 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
if i remember correctly
on castle the rpm should be on white cable not the orange


Top
 Profile  
 
PostPosted: Fri 01. Oct 2021 23:55:38 
Offline

Joined: Tue 08. Jun 2021 19:53:26
Posts: 24
After reading the Spirit manual on Governors, the Castle Creastion ESC need a special cable offered by Spirit-Systems to enable the flybarless unit to read the RPM.


Top
 Profile  
 
PostPosted: Sat 02. Oct 2021 11:38:02 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
actually you can just solder a resistor on the esc cable :-)

http://manual.spirit-system.com/index.p ... _Telemetry

Quote:
For Experts: Alternatively you can modify your current Throttle cable by adding 10kOhm resistor between white (signal) and red (+) wires. In this case the Telemetry cable is not required.


btw remember that white cable + rpm out is just for governor ( on PIT pin )
while orange cable + link live + resistor is just for telemetry ( on AUX1 connector )


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .