Spirit System
https://www.spirit-system.com/phpBB3/

SAB Kraken 580 Setup
https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=4390
Page 1 of 1

Author:  TWheli [ Sat 14. Nov 2020 15:48:59 ]
Post subject:  SAB Kraken 580 Setup

Hi,

i share my Setup for the new SAB Kraken 580 maybe it is helpful to someone

Setup:

Spirit RS
Swash 3xGDW BLS590 - 17mm
Tail 1x GDW BLS895 - 18mm
Xnova 4025-560
Jive Pro 120
12s 3300
SAB 570 TB
SAB 95 TB

i work nice with the stock blades or MS Rapid 580 blades between 1800 and 2400 rpm








Best Regards
Timo

Attachments:
Kraken580.4ds [255 Bytes]
Downloaded 209 times

Author:  TWheli [ Sat 14. Nov 2020 16:10:41 ]
Post subject:  Re: SAB Kraken 580 Setup

some pictures

Attachments:
Kraken580-2.jpg
Kraken580-2.jpg [ 331.25 KiB | Viewed 1244 times ]
Kraken580.jpg
Kraken580.jpg [ 297.67 KiB | Viewed 1244 times ]

Author:  Luv2fly2 [ Sun 15. Nov 2020 3:43:08 ]
Post subject:  Re: SAB Kraken 580 Setup

Where did you get that antenna holder?

Author:  TWheli [ Sun 15. Nov 2020 8:34:46 ]
Post subject:  Re: SAB Kraken 580 Setup

Included with the Kraken kit

Author:  Goody63 [ Wed 04. May 2022 6:30:26 ]
Post subject:  Re: SAB Kraken 580 Setup

Hi there

Just wondering if you had any issues getting the cyclic range centred (e.g. 12+ to 12-).

I have the same setup (GDW servos etc) but only seem to be able to get a equal range of travel by winding out the Blade Grip linkage rods a fair way (and starting to worry how much thread they have to be secure).

When I wind the Servo linkages out a touch to compensate (and reduce the length of the blade grip linkages) then I cant seem to be able to get a even cyclic range (ie end up with something like 10+ to 13-).

Any help would be much appreciated.

Cheers

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/