It is currently Thu 28. Mar 2024 14:27:58

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: New transmitter
PostPosted: Wed 08. Apr 2020 11:29:58 
Offline

Joined: Sat 28. Sep 2019 11:05:22
Posts: 9
Hi,

I just replaced my old Futaba transmitter with new Futaba one. Is there any way to calibrate the stick movements in Spirit software without changing any of the other parameters ie. swash level, limits etc. Function settings are equal in both transmitters.

Thanks!


Top
 Profile  
 
 Post subject: Re: New transmitter
PostPosted: Wed 08. Apr 2020 11:58:06 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

this should be performed in the radio itself.
So that end points displayed in the Diagnostic tab of the Spirit Settings will show +/- 100%.

By default when using S-BUS it is not needed to change anything.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: New transmitter
PostPosted: Thu 09. Apr 2020 8:54:48 
Offline

Joined: Sat 28. Sep 2019 11:05:22
Posts: 9
Thanks for your answer! I'm using sbus2 and had to change the end points and got most of the values +100 or -100. Few values are either 101 or 99 and can't get it to 100.

Pitch center is off by 1% as I checked the transmitter pitch curve where it says position 0, and then the spirit software was off by 1%.

About the transmitter gyro settings: transmitter gyro for AIL and ELE seems to be at AVCS (on) and value 50 by default. Do I have to turn both values off? Rudder gyro value seems to work and also needed an end point adjustment.


Top
 Profile  
 
 Post subject: Re: New transmitter
PostPosted: Thu 09. Apr 2020 11:51:35 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

please reset all trims/subtrims and repower the unit. Centers are calibrated automatically, so endpoints might be fixed on its own.

AIL and ELE gyro gains are useless, so you can turn them off. Cyclic gain is configured in the software and usually no adjustments are needed.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: New transmitter
PostPosted: Thu 09. Apr 2020 13:11:00 
Offline

Joined: Sat 28. Sep 2019 11:05:22
Posts: 9
Hi,

All my trims and subtrims are at 0, double checked. So far the negative pitch is either -99 or -101 and the pitch center is off by +1% or +2%. Left aileron is also -99 or -101.

I did try to set the end points higher, repower and adjust but it's still the same. It's always one off or one too much, guess I have to deal with it. :roll:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .