It is currently Thu 28. Mar 2024 13:50:49

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Control twitch
PostPosted: Sat 04. Apr 2020 23:10:18 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
Hello!

I am having some issues that I think are due to an issue with my Spirit 2. I'm setting up the Spirit 2 in my Synergy E5s right now. Sometimes all the servos just twitch. They twitch for just a second then move back to the commanded position. I've tried 2 different receivers and the issue persists with both of them. I did a factor reset of the Spirit but that didn't help either. I'm running firmware 2.8. Below is my setup.

Futaba r7008sb receiver
Futaba 18sz transmitter
Spirit 2 FBL
Spirit 2 connection to RX via S.Bus2 using Spirit telemetry cable
Kontronik Kolibri 130 ESC with BEC set to 8.0v
Futaba HC500 cyclic servos
Futaba BLS276SV tail rotor servo

I'm attaching my setup file.

Could there be something wrong with my Spirit 2?


Attachments:
e5ss.4ds [255 Bytes]
Downloaded 35 times
Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Sun 05. Apr 2020 19:09:29 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

you can try if the problem will persist when receiver is connected with a direct cable.
Please connect servo cable at the S.BUS port, not S.BUS2.

Do you use FrSky integration cable, am I right?

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Sun 05. Apr 2020 19:13:16 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
Hello

I tried an sbus cable last night. This did fix the problem.

Yes I’m using the frsky cable for sbus2. I would like to use sbus2 so I can get telemetry.


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Sun 05. Apr 2020 19:15:29 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Great, could you let me know how the receiver was powered up?
If S.BUS2 is used, nothing in the S.BUS port should be connected.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Sun 05. Apr 2020 19:17:54 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
The spare power lead for the ESC is connected to the aux2 port. The primary lead from the ESC is connected to the receiver on channel 3 for throttle control.


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Tue 07. Apr 2020 17:32:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

what Futaba modulation you are using? Is it FASSTest 12/16ch?

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Tue 07. Apr 2020 17:35:44 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
FASSTest 18ch


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Wed 08. Apr 2020 22:48:45 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
Any advice on how to fix this?


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Fri 10. Apr 2020 2:56:41 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
Hello Tomas

Any update for me?


Top
 Profile  
 
 Post subject: Re: Control twitch
PostPosted: Mon 13. Apr 2020 15:27:23 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

we will check tomorrow with Futaba 16sz once I will be back in the work.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .