Spirit System
https://www.spirit-system.com/phpBB3/

bug in Jeti spirit.bin 2.7.0
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=3680
Page 1 of 1

Author:  Gerrybru [ Sun 15. Dec 2019 12:53:48 ]
Post subject:  bug in Jeti spirit.bin 2.7.0

Hi,
in spirit.bin 2.7.0 is a serious bug in the rescue settings.
If I want to set the pitch value for the rescue there it is already displayed wrong.
If I want to save this value changed, it jumps back to below 10%.
Values from the Spirit Settings 2.7.1 are taken over correctly.
So I may not change any values in this range via Jeti transmitter, otherwise the rescue pitch is always close to 0°.
Please check and correct.

Author:  ZeXx86 [ Mon 16. Dec 2019 10:38:13 ]
Post subject:  Re: bug in Jeti spirit.bin 2.7.0

Please update to the latest 2.7.1 BIN file.
It was updated today.

Author:  Gerrybru [ Mon 16. Dec 2019 13:19:21 ]
Post subject:  Re: bug in Jeti spirit.bin 2.7.0

ZeXx86 wrote:
Please update to the latest 2.7.1 BIN file.
It was updated today.

That's really fast.
Thank you very much!

Author:  Tom555 [ Mon 16. Dec 2019 22:46:28 ]
Post subject:  Re: bug in Jeti spirit.bin 2.7.0

Hi,

where do I find the latest Spirit.bin (2.7.1)?

On the page which describes the Jeti Integration? There is a link to the configuration file:
"Now download the Configuration file, which has BIN extension. The file name is "Spirit.bin"........".

There is no version tracking / mentioning behind the link.

Regards
Tom555

Author:  ZeXx86 [ Tue 17. Dec 2019 8:14:35 ]
Post subject:  Re: bug in Jeti spirit.bin 2.7.0

Hi,

you will always find it at the Download section.
To resolve the problem with unknown version we created archive with version number. This archive must be extracted and inserted to Jeti Devices directory as usually.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/