It is currently Thu 28. Mar 2024 19:43:45

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 29. Jun 2020 14:39:49 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
Hi
I did the vibes analys in software 3.1 Spirit RS without blades,and the text says extremley high vibes in ele and yaw 110%,the ail ok.but the graph shows only 22% in ele and yaw.the TX jetis log shows 10%.I removed rotorhead and swashplate the text,still extremley high vibs 110% the graph 16%.
In Spirit pro when i did the analysis it never excides 14% in graph and the text says the same.
Can someone explain whats going on?
Thanks
//Latjo


Last edited by latjo-k on Mon 06. Jul 2020 11:08:53, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 20:44:46 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Hi,

it should be identical with Spirit Pro, if both are running version 3.1.
If not something is different.

Can you let me know what is "text"?

If there was older version such as 2.8 then Vibration Level was very likely significantly lower.
Now vibration level is measured differently.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 21:48:49 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
Is it a nitro model? We are all having this problem.


Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 21:52:46 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
In both cases on electric and nitro it should display higher vibrations and it is perfectly correct.
Now it is displaying real vibrations of the model similarly as Vibration Analysis in the Spirit Settings.
So there is nothing wrong about it.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 22:09:58 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
ZeXx86 wrote:
Hi,

it should be identical with Spirit Pro, if both are running version 3.1.
If not something is different.

Can you let me know what is "text"?

If there was older version such as 2.8 then Vibration Level was very likely significantly lower.
Now vibration level is measured differently.

HI
I run 3.1 on both the PRO and RS,what i mean whith text is the text to the right of the green bar.
Attached is a screenshot when the motor is running whitout blades,its Electric.
Thanks
//Latjo


Attachments:
Vibes.jpg
Vibes.jpg [ 101.81 KiB | Viewed 299 times ]
Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 22:13:25 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Oh,
could you make sure that the PCB (electronics) in the Spirit enclosure is really holding steady?
It should be possible to check with a connected servo connector.

From the plot it look like this issue. Or the cables are hitting the case somehow.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 29. Jun 2020 22:41:46 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
Hi
What i could see so is the pcb steady,no Cables hitting the case.
Nothing abaout vibrations is visible in The log.
//Latjo


Top
 Profile  
 
PostPosted: Tue 30. Jun 2020 20:58:59 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Hi,

sometime when blades are off and gears are unloaded there are additional vibrations.
So maybe you can add additional load (at least tail blades) and measure again.

Did you noticed something strange in the air?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 30. Jun 2020 21:31:59 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
ZeXx86 wrote:
Hi,

sometime when blades are off and gears are unloaded there are additional vibrations.
So maybe you can add additional load (at least tail blades) and measure again.

Did you noticed something strange in the air?

hi
Went flying today dident notice any strange behaveor.Run the analysis whith tailblades on,even worse
the green bar Went up to 139.
Attached is a foto of vibes from flight today, DS14


Attachments:
IMG_0384.JPG
IMG_0384.JPG [ 27.83 KiB | Viewed 259 times ]
Top
 Profile  
 
PostPosted: Mon 06. Jul 2020 11:06:42 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
HI
The viberation problem whith SAB Kraken and RS is solved.In the kit there are two options.I chose the left one,but
the plate is attached direcley on the gearbox not good,the other,the right one offer a vibes fri attachment.
After changing to the right solution the vibes is max 30,software says OK.
Thanks everybodt have a nice day
//Latjo


Attachments:
IMG_0387.JPG
IMG_0387.JPG [ 1.5 MiB | Viewed 216 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: ZeXx86 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .