It is currently Sat 27. Apr 2024 12:53:55

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 3 of 3
  [ 27 posts ]  Go to page Previous  1, 2, 3
  Print view Previous topic | Next topic 
Author Message
ZeXx86
 Post subject: Re: WiFi 3.1
PostPosted: Mon 01. Jun 2020 18:26:00 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
Fortune7 wrote:
ZeXx86 wrote:
Probably serial port you selected is not correct one or there is loose connection somewhere.
Spirit unit is used only for powering.
Power supply must be same for Wifi-Link and Spirit unit.


OK, thanks, Tomas - I'll check again.

Cheers, Andy

If your module was not updated to 3.0.0 then this is not fix for you.

_________________
Spirit System developer
Top
 Profile  
 
ajadda
 Post subject: Re: WiFi 3.1
PostPosted: Mon 01. Jun 2020 18:46:34 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

OK, I had success now repairing the WiFi-Link following the instructions.
Must have been some connection-fault, after reconnecting it worked!
Now I was able to flash version 3.1.
I just need to reconfigure the WiFi-Link again.

Thanks a lot, now I can flash the other one also.

Regards,
Alexander


Last edited by ajadda on Mon 01. Jun 2020 19:30:59, edited 1 time in total.

Top
 Profile  
 
ZeXx86
 Post subject: Re: WiFi 3.1
PostPosted: Mon 01. Jun 2020 19:22:56 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
Fortune7: Do you think you are able to measure resistance of the resistors?
Are you powering Wifi-Link and Spirit unit from the same power supply (BEC/battery)?

_________________
Spirit System developer
Top
 Profile  
 
ZeXx86
 Post subject: Re: WiFi 3.1
PostPosted: Mon 01. Jun 2020 19:30:22 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
ajadda: You are welcome!

_________________
Spirit System developer
Top
 Profile  
 
Fortune7
 Post subject: Re: WiFi 3.1
PostPosted: Mon 01. Jun 2020 19:47:16 
Offline

Joined: Tue 21. Jan 2020 11:28:04
Posts: 78
ZeXx86 wrote:
Fortune7: Do you think you are able to measure resistance of the resistors?
Are you powering Wifi-Link and Spirit unit from the same power supply (BEC/battery)?


OK, Tomas, my mistake was to power the Wifi adapter from a separate 2S battery. Now, with it connected to the BEC / Spirit supply, it works fine.

So sorry to bother you with this dumb mistake - you are very busy and you don't need idiots taking up your time!

Great Customer Service, as always!

Many thanks, Andy
Top
 Profile  
 
urgno
 Post subject: Re: [SOLVED] WiFi 3.1
PostPosted: Tue 02. Jun 2020 21:38:38 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
I was able to fix the module using the pdf procedure now is at v3.1 ;)
next things to do is to remove the two resistors ... will do in the next days

thanks a lot Thomas
Top
 Profile  
 
urgno
 Post subject: Re: [SOLVED] WiFi 3.1
PostPosted: Sat 06. Jun 2020 23:05:52 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
today i did the resistor removal and short
and can confirm all works correctly on spirit2 too ;)

thanks Tomas
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 27 posts ]  Go to page Previous  1, 2, 3

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .