Mine is the Red Unit as well. 3.1 isn't going anywhere near my Pro
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] F/W 3.1 Jittery Servos - old Spirit + EX BUS https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4014 |
Page 2 of 3 |
| Author: | buttles [ Fri 29. May 2020 18:40:03 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
Mine is the Red Unit as well. 3.1 isn't going anywhere near my Pro
|
|
| Author: | Roby [ Fri 29. May 2020 18:46:58 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
I do have default channel order in the Spirit unit. My Spirit Pro is working perfectly with 3.1.0 (on the bench at least) 
|
|
| Author: | buttles [ Fri 29. May 2020 18:49:09 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
ZeXx86 wrote: Do you have default channel order in the Spirit unit? 1-7 are all in order on mine. When I went in to check, the unit had dumped all my Function settings. It's going back in the bag until I feel inclined to put 2.8 back on. |
|
| Author: | ZeXx86 [ Fri 29. May 2020 19:10:33 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
So it is old Spirit unit right? |
|
| Author: | buttles [ Fri 29. May 2020 19:12:00 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
Yes, the Red one you have just discontinued. Ok, just looked in the Specktrum Analiser and all three axis vib levels are through the roof. Which is odd considering it's sat static on the bench  
|
|
| Author: | ZeXx86 [ Fri 29. May 2020 19:31:30 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos |
I hope we will find what could be wrong during weekend. But during months of testing we have never encountered such issue. |
|
| Author: | ZeXx86 [ Fri 29. May 2020 19:56:53 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos - old Spirit + EX BUS |
Possibly we have found the issue, but it is required to test. So people interested in this could send me private message. |
|
| Author: | thestructured [ Sat 30. May 2020 7:56:15 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos - old Spirit + EX BUS |
All of my units are Pros, and I run Spektrum. Is this problem Jeti specific? |
|
| Author: | buttles [ Sat 30. May 2020 8:02:13 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos - old Spirit + EX BUS |
thestructured wrote: All of my units are Pros, and I run Spektrum. Is this problem Jeti specific? It's looking like it's Jeti only. Three people have had issues on here and all have Jeti Rx. Tomas is on it and knows where the issue lies. |
|
| Author: | ZeXx86 [ Sat 30. May 2020 9:05:25 ] |
| Post subject: | Re: F/W 3.1 Jittery Servos - old Spirit + EX BUS |
Hello, The problem was fixed. Please re-download the firmware from our web page. Then flash it again. New revision is there which will resolve the issue. It is related only to EXBus protocol and old Spirit units. We are sorry for the inconvience. |
|
| Page 2 of 3 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|