It is currently Fri 29. Mar 2024 15:43:01

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 25. May 2020 17:28:35 
Offline

Joined: Sat 04. May 2019 17:14:54
Posts: 106
How can I get rudder rate mode without disabling the Stabi function?

I have Stabi activated by a separate channel, not negative gain, so shouldn’t the software see a negative gyro gain and realize that there is no conflict of my intentions?

Either that, or a separate function called “F: Rudder rate mode” only possible with non-motorized tails.

_________________
Find me on HeliFreak, username Xoexoe


Top
 Profile  
 
PostPosted: Mon 25. May 2020 17:38:58 
Offline

Joined: Wed 15. Apr 2020 12:06:30
Posts: 12
Location: Witten, Germany
In "Stabilisation (Scale)" mode it should be possible to switch between head-lock and normal/rate mode with stabilisation turned on.


Top
 Profile  
 
PostPosted: Mon 25. May 2020 18:02:21 
Offline

Joined: Sat 04. May 2019 17:14:54
Posts: 106
I fly with Rescue Normal as Stabi via dedicated channel. On the bench I didn’t get any Rate response from the tail when going to negative gyro gain. Even with the Spirit Settings app open on my computer, I sew negative gyro gain but the Diagnostic page still said Heading Lock or whatever.

_________________
Find me on HeliFreak, username Xoexoe


Top
 Profile  
 
PostPosted: Mon 25. May 2020 18:17:06 
Offline

Joined: Wed 15. Apr 2020 12:06:30
Posts: 12
Location: Witten, Germany
Ah, then it should be possible to use two banks. E.g. bank 0 with stabi mode "Disabled" and bank 2 with stabi mode "Rescue". Then use a second channel to enable the stabi function. Then put both functions (bank switching and stabi function) on a single switch. Depending on the radio it should also be possible to switch between bank 0 and bank 1 as long as stabilization (rescue) is disabled. And as soon as rescue is engaged switch to bank 2 and enable the stabi function.

In my case I use the following programming for a 3.-pos. switch with two channels (ch7: bank, ch8: stabi):
pos. 1: bank 0, stabi function enabled (with stabilization mode)
pos. 2: bank 0, stabi function disabled (with stabilization mode)
pos. 3 (momentary): bank 2, stabi function enabled (with rescue mode)

Since I am still learning I am able to use pos. 1 for easy launch, land and hover, pos. 2 for training without stabilization and pos. 3 for rescue in case of an emergency.


Last edited by Milindur on Mon 25. May 2020 18:20:31, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon 25. May 2020 18:18:15 
Offline

Joined: Wed 15. Apr 2020 12:06:30
Posts: 12
Location: Witten, Germany
According to this page, normal/rate mode is only possible when stabi mode is disabled or stabilization scale. But I have to admin, that it would be great to control head-lock and rate mode using pos./neg. gain in every mode, when a dedicated stabi function channel is used.


Top
 Profile  
 
PostPosted: Mon 25. May 2020 18:39:58 
Offline

Joined: Sat 04. May 2019 17:14:54
Posts: 106
Very clever with using one switch to both change banks and enable rescue/rate mode. That seems very possible.

I’d still like a simpler way to do it, but I’m happy knowing it can be done. Thanks.

_________________
Find me on HeliFreak, username Xoexoe


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: EricDP and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .