Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] srxl2 AR6610T
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3791		 Page 11 of 12
Author:  Neilsteers [ Sat 30. May 2020 20:32:35 ]
Post subject:  Re: srxl2 AR6610T
I have the Jeti cable plugged into the rudder and pit port from the rx
Author:  10x [ Sat 30. May 2020 21:28:45 ]
Post subject:  Re: srxl2 AR6610T
You will have to put wire with out plug into plug next to the other wire on the el/pi/ai plug
Author:  Neilsteers [ Sat 30. May 2020 23:10:01 ]
Post subject:  Re: srxl2 AR6610T
So to clarify from my srxl2 port on the rx I have the Jeti cable to the spirit 2 and divides into two plugs, one with red and brown cables plug into the rudder port and the other plug with the orange wire goes into the pi/ele/ail port so where should I put the yellow rpm cable from the esc are saying I need to take the plug off and put it in the spare signal pin on the rudder port ?
Author:  yufasa [ Sun 31. May 2020 0:22:08 ]
Post subject:  Re: srxl2 AR6610T
You have to remove the yellow wire out of the plug and put it in the plug that is currently plugged into the ail/pit port making sure it goes into the middle position
Author:  10x [ Tue 02. Jun 2020 17:40:41 ]
Post subject:  Re: srxl2 AR6610T
HeliMLM wrote:
... this is really great news. thx a lot Tomas!

the fix of the failsafe problem with 4651T/Spirit together with the update of the 4651T firmware that should arrive in the next days (fix of RSSI problem on some EU Tx and some other topic) there should be no more problems in fully using SRXL2 hopefully :)



New FW out for 6610t and 4651t and all sorted with RSSI.....
Author:  HeliMLM [ Thu 04. Jun 2020 7:19:48 ]
Post subject:  Re: srxl2 AR6610T
10x wrote:
New FW out for 6610t and 4651t and all sorted with RSSI.....


YESSSS... i've tested yesterday evening and all is fine now with iX12 EU model... 4651t is sending correct dBm and RSSI (display & logs)
Author:  TD757 [ Fri 03. Jul 2020 10:38:25 ]
Post subject:  Re: [SOLVED] srxl2 AR6610T
I would like to update my Spektrum AR6610T with the latest firmware version. Can I use my existing SPMA3030 USB programmer or do I need to purchase a different one such as the SPMA3060 or SPMA3065?
Author:  latjo-k [ Sat 04. Jul 2020 10:15:14 ]
Post subject:  Re: [SOLVED] srxl2 AR6610T
hi
You need the SPMA3065,the SPMA3030 only works whith AR7200BX.
//Latjo
Author:  TD757 [ Sun 19. Jul 2020 10:20:00 ]
Post subject:  Re: [SOLVED] srxl2 AR6610T
How does one update the firmware for the 4651T. I have the 3065 cable and have modified the cable for the 4649T so that it fits the 4651. But it won’t connect to the software. I managed to update the 6610T okay so know the cable and software work. Is the 4651T even able to be firmware updated?
Author:  HeliMLM [ Sun 19. Jul 2020 11:07:53 ]
Post subject:  Re: [SOLVED] srxl2 AR6610T
... the pinout on 4649T and 4651T is different!
Page 11 of 12 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/