| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] srxl2 AR6610T https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3791 |
Page 2 of 12 |
| Author: | latjo-k [ Fri 06. Mar 2020 7:47:29 ] |
| Post subject: | Re: srxl2 AR6610T |
Any progress? |
|
| Author: | ZeXx86 [ Fri 06. Mar 2020 17:40:05 ] |
| Post subject: | Re: srxl2 AR6610T |
Hello, we have found the issue with certain AR full size receivers. I believe firmware that has fix for them will be available on monday. Also we are preparing guide for wiring. |
|
| Author: | latjo-k [ Fri 06. Mar 2020 20:35:29 ] |
| Post subject: | Re: srxl2 AR6610T |
I think its a diffrent,we can always count on Tomas and heas team that they always do ther best to satified our needs. I wonder if any other supplyer of fbl units put in so mutch effort as they do. If we heli pilots stick to Spirit ther is no limit what he and heas team can bring out for us in the future. //Lars |
|
| Author: | tfmcnellist [ Sat 07. Mar 2020 0:36:48 ] |
| Post subject: | Re: srxl2 AR6610T |
looking forward to the revision. |
|
| Author: | ZeXx86 [ Wed 11. Mar 2020 11:10:34 ] |
| Post subject: | Re: srxl2 AR6610T |
Hello, we have solved the problems with firmware update. All SRXL2 receivers should work now. Please flash this firmware: http://spirit-system.com/dl/fw//spirit-fw-2.8.1.4df Wiring diagram for AR6610T will be available tomorrow. For this receiver normal JETI Integration cable is needed (or you can make the cable at home). |
|
| Author: | latjo-k [ Wed 11. Mar 2020 14:35:44 ] |
| Post subject: | Re: srxl2 AR6610T |
ZeXx86 wrote: Hello, we have solved the problems with firmware update. All SRXL2 receivers should work now. Please flash this firmware: http://spirit-system.com/dl/fw//spirit-fw-2.8.1.4df Wiring diagram for AR6610T will be available tomorrow. For this receiver normal JETI Integration cable is needed (or you can make the cable at home). Hi Tomas I have tested the new firmware and there is some issues. Its sems impossible to get throttle out to work,in diagnostik window(ch1)it moves from 0-100% but the esc is not responding.Iwent back to spm4649t just for testing and the esc starts up fine,whith the same settings in unit (i only Changes recivertype). And channel 7 bankswitching and 8 rescue dont respond(50%)at all in diagnostik window,same settings in tx DX9 as whith spm4649t.It sems that AR6610T only trasfer 6 channels. Hope you can fix the problems or tell me if i doing something wrong. Everything else works perfekt. //Lars |
|
| Author: | ZeXx86 [ Wed 11. Mar 2020 16:45:28 ] |
| Post subject: | Re: srxl2 AR6610T |
Sorry for the troubles. After inspection we have found what is wrong. Now also throttle from the unit will work. http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df You can also use Throttle output directly from the receiver. |
|
| Author: | latjo-k [ Wed 11. Mar 2020 17:49:09 ] |
| Post subject: | Re: srxl2 AR6610T |
ZeXx86 wrote: Sorry for the troubles. After inspection we have found what is wrong. Now also throttle from the unit will work. http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df You can also use Throttle output directly from the receiver. Hi now trottle works,but what abaut ch7 and 8? Ch5 gyro,it looks like it is reversed.The monitor in tx shows 70% in diagnostiks it shows -63 //Lars |
|
| Author: | tfmcnellist [ Thu 12. Mar 2020 21:27:06 ] |
| Post subject: | Re: srxl2 AR6610T |
This was one of my original question, will all 8 channels work? |
|
| Author: | tfmcnellist [ Fri 13. Mar 2020 19:45:22 ] |
| Post subject: | Re: srxl2 AR6610T |
latjo-k wrote: ZeXx86 wrote: Sorry for the troubles. After inspection we have found what is wrong. Now also throttle from the unit will work. http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df You can also use Throttle output directly from the receiver. Hi now trottle works,but what abaut ch7 and 8? Ch5 gyro,it looks like it is reversed.The monitor in tx shows 70% in diagnostiks it shows -63 //Lars Any update to this question? |
|
| Page 2 of 12 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|