It is currently Mon 01. Jun 2020 6:17:02

All times are UTC + 1 hour





Post new topic Reply to topic  [ 104 posts ]  Go to page 1, 2, 3, 4, 5 ... 11  Next
  Print view Previous topic | Next topic 
Author Message
 Post subject: srxl2 AR6610T
PostPosted: Thu 27. Feb 2020 16:08:09 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 43
Hi serius problems
I have install the new AR6610T in my Kraken(Spirit pro)using the Jeti cable.And the unit dont show any respons at all on stick input.I have folow the manual and set the unit rx to srxl2 plug in yellow Cable in ail pin +- in rud portit is the same as SPM4649T,the other end in rx markt bind/prog/srxl2 yellow Cable in the pin markt whit an
S.I Think Every cable is connected right.i have tested the rx by plug in servos in different ports it works fine.
i have install airware 2.05 in tx 2.8.0 in spirit.The led on unit is solid the log says good helth.
IN diagnostic page all channels show 0 or 50%.
PLeas help?
//Lars


Attachments:
IMG_0367.JPG
IMG_0367.JPG [ 1.89 MiB | Viewed 408 times ]
IMG_0366.JPG
IMG_0366.JPG [ 1.62 MiB | Viewed 408 times ]
Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Thu 27. Feb 2020 18:15:45 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 143
you sure is connected properly ?

http://manual.spirit-system.com/index.p ... trum_SRXL2


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Thu 27. Feb 2020 22:32:38 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 43
hi
Any other solution to Connection?


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 28. Feb 2020 4:57:28 
Offline

Joined: Thu 28. Aug 2014 20:05:23
Posts: 51
It looks like you have something in the sat port. What cable is that? If it’s a regular sat you can’t use it. If it’s a srxl2 sat then it should be plugged into the AR6610T.

From the receiver port
Orange should go to Ail pin
Red + should go to + on rud port
Brown - should go to - on rud port

This the same for the Spirit Pro


Attachments:
C67C630C-AD38-427C-9A57-E4DA83018845.jpeg
C67C630C-AD38-427C-9A57-E4DA83018845.jpeg [ 117.47 KiB | Viewed 388 times ]
Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 28. Feb 2020 5:57:01 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 43
tfmcnellist wrote:
It looks like you have something in the sat port. What cable is that? If it’s a regular sat you can’t use it. If it’s a srxl2 sat then it should be plugged into the AR6610T.

From the receiver port
Orange should go to Ail pin
Red + should go to + on rud port
Brown - should go to - on rud port

This the same for the Spirit Pro

In The satport is esc telemetry connected,The red cable going to pitch pin is The rpm from esc.
I have no sat connected nor unit or ar6610t.
And The orange cable from rx going to ail pin on unit and +- from rud port on unit to rx.
I used The spm4649t and one sat before,it works perfekt. I guess i have to go back to that combo
//Lars


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 28. Feb 2020 10:57:12 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 9489
Hello,

we will receive AR6610T receiver within 2 days, then we can prepare all instructions for connection and setup.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 28. Feb 2020 11:44:45 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 43
ZeXx86 wrote:
Hello,

we will receive AR6610T receiver within 2 days, then we can prepare all instructions for connection and setup.

OK
Wee have a helimeet tomorrow so i have going back to spm4649t,looking forward that you can solve
the problems Tomas.
//Lars


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 28. Feb 2020 13:21:31 
Offline

Joined: Thu 28. Aug 2014 20:05:23
Posts: 51
I was going to set mine up today. Glad I waited and checked this out. Thanks.


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Tue 03. Mar 2020 2:06:21 
Offline

Joined: Thu 28. Aug 2014 20:05:23
Posts: 51
Any update on the AR6610T setup and programming?
Thanks for the hard work on this.


Top
 Profile  
 
 Post subject: Re: srxl2 AR6610T
PostPosted: Fri 06. Mar 2020 3:29:12 
Offline

Joined: Mon 02. Mar 2020 18:57:12
Posts: 3
I'm interested in this as well. I just received my Spirit 2 and am still deciding on receiver/sat. It would be nice to know definitively if the AR6610T is a valid option.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 104 posts ]  Go to page 1, 2, 3, 4, 5 ... 11  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], Kiwi1970 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .