Hello ZeXx86
Thanks for your quick reply.
I meant Spirit Pro.
How should the ESC cable still be connected to the RUD port?
Börni1
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit,GeoLink, mit Spektrum DX9 Sender https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3571 |
Page 1 of 1 |
| Author: | Börni1 [ Tue 17. Sep 2019 8:26:40 ] |
| Post subject: | Spirit,GeoLink, mit Spektrum DX9 Sender |
Hello, I need help. I sent the Spirit, - and the Geo-Link. In addition, I bought the SPM 4649T. As a remote control transmitter, the DX9. Unfortunately, I now have big problems with the connections and setting up the switches. When inserting the cables of the SPM4649T I prove the Rudd slot and ELE / PIT / AIL Slot Where, for example, will the cable of the Rudder servo and where the BEC power supply plugged in? I do not want to use slots as much as possible, because I use these for the functions Geo link needed. Can someone of you who also has the Spektrum DX9 as a sender, his assignment of the slots in the spirit and his switch settings with the Geo link? Please help Thank you Börni1 |
|
| Author: | ZeXx86 [ Tue 17. Sep 2019 8:31:29 ] |
| Post subject: | Re: Spirit,GeoLink, mit Spektrum DX9 Sender |
Hello, GeoLink should be connected at the satellite port. SPM4649T at the AIL and RUD port according Spektrum integration guide - through Jeti integration cable. ESC/throttle cable should be connected at the AUX1 port. BEC cable can be connected at the AUX2 and/or CH0 port. That is all you have to connect. |
|
| Author: | Börni1 [ Tue 17. Sep 2019 8:40:39 ] |
| Post subject: | Re: Spirit,GeoLink, mit Spektrum DX9 Sender |
Hello ZeXx86 Thanks for your quick reply. I meant Spirit Pro. How should the ESC cable still be connected to the RUD port? Börni1 |
|
| Author: | ZeXx86 [ Tue 17. Sep 2019 11:01:29 ] |
| Post subject: | Re: Spirit,GeoLink, mit Spektrum DX9 Sender |
I am sorry, this was mistake. Throttle cable should be connected always at the AUX1 port as described in our manual / Wiring section. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|