| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Weird failsafe issue https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3554 |
Page 1 of 1 |
| Author: | azaz44 [ Thu 05. Sep 2019 10:12:20 ] |
| Post subject: | Weird failsafe issue |
I've just build a new heli and can't setup the failsafe. Hardware is: - Spirit Pro - FrSky XR4SB Everything works fine except of failsafe. I did program it few times in Spirit, I think I also set the receiver to send "no pulses". But what happens is: - The system is running - I turn off the transmitter (it says "receiver still connected" and asks for confirmation, I confirm) - one second later all 4 servos go to extreme positions and start to move wildly What can be the reason? |
|
| Author: | Netopyr [ Fri 06. Sep 2019 8:38:16 ] |
| Post subject: | Re: Weird failsafe issue |
Hi, I had the same thing, I set the same for Spirit and XR4SB. Netopyr |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|