It is currently Fri 29. Mar 2024 14:54:39

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 22. Aug 2019 16:43:34 
Offline

Joined: Sun 10. Sep 2017 21:52:01
Posts: 15
I´m using Spirit, Hobbywing telemetry with Futaba. All values are displayed correctly, so does rpm. Even in rpm tester menu. The problem is that current rpm in the software is not displayed, but requested rpm. I believe that´s why gov spools up to 100% throttle. Maybe a bug?


Top
 Profile  
 
PostPosted: Thu 22. Aug 2019 18:11:47 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
Are you spooling it up while connected to the software? Do you have the RPM wire from the ESC connected to the PIT pin in the spirit or are you just running the telemetry cable from the HW?


Top
 Profile  
 
PostPosted: Thu 22. Aug 2019 18:18:46 
Offline

Joined: Sun 10. Sep 2017 21:52:01
Posts: 15
Yes, while connected to software. Rpm cable is not plugged in, since i believed it´s not needed. Only telemetry cable from ESC.


Top
 Profile  
 
PostPosted: Thu 22. Aug 2019 18:25:27 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
That is why your gov is not working. RPM cable must be plugged in for the governor to work.


Top
 Profile  
 
PostPosted: Thu 22. Aug 2019 18:36:55 
Offline

Joined: Sun 10. Sep 2017 21:52:01
Posts: 15
Can I read this somewhere? Spirit is getting rpm via ESC Telemetry cable, so i´m wondering.


Top
 Profile  
 
PostPosted: Thu 22. Aug 2019 20:21:34 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
I offered you a solution and you're asking me to prove that you need the wire? :roll: Your governor is obviously not working without it.

Read the governor setup section in the manual, it's in there. http://manual.spirit-system.com/index.p ... n#GOVERNOR


Top
 Profile  
 
PostPosted: Fri 23. Aug 2019 13:46:57 
Offline

Joined: Sun 10. Sep 2017 21:52:01
Posts: 15
I know, that rpm wire is needed without telemetry, but I´m a little confused that wire is still needed with rpm already been displayed.
Anyway, thanks for help!
I plugged rpm wire into pit. It works now :)


Top
 Profile  
 
PostPosted: Fri 23. Aug 2019 14:56:54 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 81
delta peak wrote:
I know, that rpm wire is needed without telemetry, but I´m a little confused that wire is still needed with rpm already been displayed.
Anyway, thanks for help!
I plugged rpm wire into pit. It works now :)


Because the only thing the Spirit does with Telemetry is pass the information through to the TX.
You need the RPM wire for Spirit governor.


Top
 Profile  
 
PostPosted: Thu 29. Aug 2019 7:44:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Telemetry data are too slow for Governor. They are displayed only for pilot and telemetry purposes. But Governor require direct measurement that is much faster in order to react quickly for any RPM deviation.

thestructured: Thank you for your support!

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .