It is currently Fri 01. Nov 2024 1:29:54

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 20. Sep 2016 19:34:02 
Offline

Joined: Sun 20. Sep 2015 0:10:51
Posts: 50
Hello, as mention before I just purchase a Triabolo 700 and have a Diabolo 550, im changing from BD3sx to Spirit Pro, will like to know for both helis, what setup should I use from the Model Presets, and what adjusted should I use, I recently install one in a Goblin Black Nitro and very please..

Triabolo 700
Flight Style: Soft 3D - Sport
Motor: Xnova XTS 4435-460
Pinion: 18T
Target Headspeed(s): 1200-1800HS
ESC: HW160a
Governor: HW Store Gov
BEC: HW internal 7.4v
Cyclic Servos: Savox SB-2282SG
Tail Servo: Savox SB-2283MG
Main Blades: NHP 680mm
TriTail Blades: NHP 110mm
Lipos: Revolextrix 5200 6S 40C

Diabolo 550
Flight Style: Soft 3D - Sport
Motor: Xnova 4020-1200KV
Pinion: 20T
Target Headspeed(s): 1700-2300HS
ESC: HobbyWing platinum 100A v3
Governor: HW Store Gov
BEC: HW internal 7.4v
Cyclic Servos: MKS 9767
Tail Servo: MKS 9780
Main Blades: Cyclone 555mm
Tail Blades: Rail 80.6
Lipos: Pulse 6s 4500mAh 45C

Thank you.


Last edited by gabs_mex on Wed 21. Sep 2016 19:12:15, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed 21. Sep 2016 17:40:39 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12433
Hello

I recommend to set the following parameters.

Diabolo 550:
Sensor/Cyclic Gain: 60-65%
Sensor/Rudder Common Gain: 1.2x
Sensor/Rotation speed: 10, 10
Advanced/Elevator Filter: 3
Rudder Delay: 0
Pirouette Consistency: 170-175

Triabolo 700:
Sensor/Cyclic Gain: 50%
Sensor/Rudder Common Gain: 1.4x
Sensor/Rotation speed: 11, 10
Advanced/Elevator Filter: 3-4
Advanced/Cyclic Feed Forward: 4-5
Rudder Delay: 0
Pirouette Consistency: 180-190

Expo can be configured in your transmitter to 20-30% or as you like (for rudder, aileron, elevator).

Nice helicopters!

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 21. Sep 2016 19:17:45 
Offline

Joined: Sun 20. Sep 2015 0:10:51
Posts: 50
Thank you very much, one las thing, when in wizard i should choose the default correct?

Will post Files when I finish them..


Top
 Profile  
 
PostPosted: Thu 22. Sep 2016 15:26:39 
Offline

Joined: Thu 01. Oct 2015 15:13:29
Posts: 178
gabs_mex wrote:
...one las thing, when in wizard i should choose the default correct?


That is still a mystery to me. Very easy to know what to do when the helicopter you are building is in the presets. But what do you do when your helicopter is not in the presets? Do you use a helicopter preset that most closely matches your helicopter size, or do you choose "default" helicopter?


Top
 Profile  
 
PostPosted: Thu 22. Sep 2016 15:37:34 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12433
You can use default without any problem. You will rewrite the parameters with values that I have written, so basically it does not matter which profile you will select.
Default is recommended for helicopters that are not in the list.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .